English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Утилитарные системы для чистых помещений
Система стерилизации на месте
A monitored clean-steam distribution skid that sequences steam admission, air removal, hold time and condensate discharge across connected hygienic process circuits.
- Sequenced clean-steam admission
- Drainable condensate management
- Multi-point temperature monitoring
Введение продукции
The Sterilize-in-Place System receives qualified clean steam, separates entrained condensate and routes steam through an automated hygienic valve manifold to connected vessels, piping or filling circuits. Pressure, drain and temperature instruments support controlled air displacement, exposure and cooling phases without dismantling the process path.
Основные характеристики
Vertical inlet separator
Automated multi-branch valve manifold
Low-point thermostatic condensate removal
Independent branch temperature inputs
Pressure indication and regulation interface
Recipe-based sterilization sequencing
HMI alarms and phase status
Решения для вашего приложения
Effective SIP depends on removing air and condensate, exposing every wetted surface to the selected condition and documenting stable hold points without damaging seals or instruments.
Cold pockets form behind retained condensateProvide sloped branches and dedicated hygienic traps at verified low points before starting the exposure hold.
Parallel circuits heat at different ratesSequence branch valves and monitor representative return temperatures independently.
Steam pressure varies during valve changesCoordinate inlet pressure control with staged branch admission and live pressure indication.
Operators cannot distinguish exposure from coolingUse recipe phases, permissives and alarms to separate air purge, heat-up, hold, depressurization and cooling.
Типичные приложения
Bioreactor and fermenter circuitsSterile transfer pipingAseptic filling product pathsPharmaceutical process vesselsHygienic filtration housings
Технические параметры
Branch count, steam demand, valve sizing, trap capacity, temperature inputs and sequencing logic are selected for the connected equipment and approved sterilization cycle.
| Основной материал | 316L stainless steel clean-steam separator, header and hygienic branch piping |
|---|---|
| Толщина панели | Separator shell typically 2.0–5.0 mm |
| эффективная ширина | Skid width typically 900–2200 mm |
| Максимальная длина | Complete skid length typically up to 3500 mm |
| Толщина линий стали | Корпус управления и скользящий лист обычно 1,5-3,0 мм |
| Плотность ядра | Плотность нержавеющей стали 316L приблизительно 8000 kg/m³ |
| Теплопроводимость | Нержавеющая сталь 316L примерно 15 Вт/(м · К) при температуре окружающей среды |
| Поверхностная отделка | Polished clean-steam surfaces with satin-finished skid and control enclosure |
| Объединенный тип | Orbital-welded hygienic header with sanitary clamps at valves, instruments and condensate trap |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Two to eight sterilization branchesSteam pressure-reducing stationBranch return-temperature sensorsHygienic thermostatic steam trapsSterile-air cooling interfaceRecipe and batch-report communicationInsulated steam piping
Planning a Sterilize-in-Place System specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
