Negative-pressure powder dispensing isolator with integrated balance

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

분말 분배 분리기

A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.

Closed Powder Dispensing
Isolated Balance Support
Negative-Pressure Chamber
Contained Material and Waste Ports

견적 요청 제품 찾아보기

상품 소개

This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.

주요 기능

A closed glovebox removes the open-front boundary from powder subdivision.

An isolated internal balance slab protects weighing stability.

Dedicated inlet and outlet interfaces separate source and receiving containers.

Negative pressure directs leakage inward toward staged filters.

A continuous liner or bag-out port contains empty packaging and cleaning waste.

응용 프로그램 솔루션

Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.

Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.

Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.

Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.

Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.

일반적인 응용 프로그램

Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation

기술 매개변수

Typical configurable construction ranges for a powder dispensing isolator are listed below.

핵심 재료	Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support
패널 두께	50-100 mm double-skin chamber and filter sections
유효 폭	1200-3000 mm usable dispensing width
최대 길이	최대 4500 mm 전체 아이솔레이터 길이
강철 면면 두께	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
코어 밀도	SUS316L 챔버 재료를 위한 대략 8000 kg/m³
열전도도 (Thermal Conductivity)	14 - 16 W / (m · K) 오스테나이트 스테인레스 스틸
표면 마무리	Electropolished SUS316L with radiused corners and removable balance surround
접합 유형	Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Continuous liner or split valveIntegrated drum or bag inletSafe-change filtersWash-in-place spray devices

Planning a Powder Dispensing Isolator specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.