English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
معدات التدفق والاحتواء الصفائحية
مسحوق الاستغناء العازل
A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.
- Closed Powder Dispensing
- Isolated Balance Support
- Negative-Pressure Chamber
- Contained Material and Waste Ports
مقدمة المنتج
This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.
الخصائص الرئيسية
An isolated internal balance slab protects weighing stability.
Dedicated inlet and outlet interfaces separate source and receiving containers.
Negative pressure directs leakage inward toward staged filters.
A continuous liner or bag-out port contains empty packaging and cleaning waste.
حلول للتطبيق الخاص بك
Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.
Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.
Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.
Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.
Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.
تطبيقات نموذجية
Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation
المعلمات الفنية
Typical configurable construction ranges for a powder dispensing isolator are listed below.
| المواد الأساسية | Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support |
|---|---|
| سمك اللوحة | 50-100 mm double-skin chamber and filter sections |
| العرض الفعال | 1200-3000 mm usable dispensing width |
| الحد الأقصى الطول | حتى على طول المعزل الكلي |
| الصلب يواجه سمك | 2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins |
| الكثافة الأساسية | تقريبا ، من مادة غرفة SUS316L |
| الموصلية الحرارية | 14-16 W / (m · K) للفولاذ المقاوم للصدأ الأوستنيتي |
| إنهاء السطح | Electropolished SUS316L with radiused corners and removable balance surround |
| نوع المشترك | Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Continuous liner or split valveIntegrated drum or bag inletSafe-change filtersWash-in-place spray devices
Planning a Powder Dispensing Isolator specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
