Cleanroom ionizing bar system in three-quarter view with controller and mounting clips

산업별 클린룸 장비

Ionizing Bar 시스템

A compact cleanroom ionizing bar that delivers balanced positive and negative ions across work surfaces, wafer handling zones and enclosed mini-environments.

Balanced Ion Output
Low-Particle Construction
Remote Status Monitoring
Flexible Bar Lengths

견적 요청 제품 찾아보기

상품 소개

The ionizing bar system places protected emitter points along a slim, low-outgassing housing to neutralize electrostatic charge over a controlled working distance. A dedicated controller maintains stable output and provides operating indication, while stainless mounting clips permit accurate alignment above conveyors, benches or process openings. Configurable lengths and clean-air assistance allow the system to match both localized and wider treatment zones.

주요 기능

Distributed emitter points provide uniform ion coverage along the active length of the bar.

Smooth polymer housing and protected silicon emitters reduce particle traps in clean production areas.

Visible status indicators and controller connections simplify routine operating checks.

Adjustable stainless mounting clips support accurate working-distance and angle setup.

응용 프로그램 솔루션

Static charge can attract particles, disturb lightweight materials and expose sensitive devices to electrostatic discharge during controlled manufacturing.

Charge accumulates unevenly across long work surfaces.Evenly spaced emitter modules distribute balanced ions along the full active bar length.

Exposed ionizer hardware can become a contamination source.A smooth low-outgassing enclosure and protected emitter geometry support cleanroom use and maintenance.

Ionization performance changes when installation distance or angle is inconsistent.Adjustable stainless clips allow repeatable positioning for the required coverage zone.

Operators may not notice a disabled or disconnected ionizer.Local status lights and an optional remote monitor provide clear operating indication.

일반적인 응용 프로그램

반도체 미니 환경Wafer and substrate handling stationsCleanroom assembly benchesPrecision film and electronics processing

기술 매개변수

Typical configuration values for a cleanroom ionizing bar system are listed below.

핵심 재료	Low-outgassing engineering polymer housing with silicon emitter points and stainless steel mounting hardware
패널 두께	2-4 mm housing wall thickness
유효 폭	300-2400 mm active ionizing length
최대 길이	Up to 2500 mm overall bar length
강철 면면 두께	1.0-1.5 mm stainless steel mounting clips
코어 밀도	1150-1450 kg/m³ for engineering polymer housing material
열전도도 (Thermal Conductivity)	0.20-0.35 W/(m·K) for polymer housing material
표면 마무리	Smooth white low-outgassing housing with passivated stainless hardware
접합 유형	Modular emitter bar with sealed end connections, adjustable clips and plug-in controller interface
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Multiple active bar lengthsClean dry air-assisted configurationRemote alarm and monitoring outputTitanium or silicon emitter points

Planning a Ionizing Bar System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.