English
البرتغالية
الإسبانية
اللغة الملاوية
الإندونيسية
الألمانية
اللغة التركية
اللغة الفيتنامية
الفرنسية
الروسية
العربيةالحالي
التايلاندية
اليابانية
الكورية
معدات الغرف النظيفة المحددة للصناعة
I نظام شريط المؤين
A compact cleanroom ionizing bar that delivers balanced positive and negative ions across work surfaces, wafer handling zones and enclosed mini-environments.
- Balanced Ion Output
- Low-Particle Construction
- Remote Status Monitoring
- Flexible Bar Lengths
مقدمة المنتج
The ionizing bar system places protected emitter points along a slim, low-outgassing housing to neutralize electrostatic charge over a controlled working distance. A dedicated controller maintains stable output and provides operating indication, while stainless mounting clips permit accurate alignment above conveyors, benches or process openings. Configurable lengths and clean-air assistance allow the system to match both localized and wider treatment zones.
الخصائص الرئيسية
Smooth polymer housing and protected silicon emitters reduce particle traps in clean production areas.
Visible status indicators and controller connections simplify routine operating checks.
Adjustable stainless mounting clips support accurate working-distance and angle setup.
حلول للتطبيق الخاص بك
Static charge can attract particles, disturb lightweight materials and expose sensitive devices to electrostatic discharge during controlled manufacturing.
Charge accumulates unevenly across long work surfaces.Evenly spaced emitter modules distribute balanced ions along the full active bar length.
Exposed ionizer hardware can become a contamination source.A smooth low-outgassing enclosure and protected emitter geometry support cleanroom use and maintenance.
Ionization performance changes when installation distance or angle is inconsistent.Adjustable stainless clips allow repeatable positioning for the required coverage zone.
Operators may not notice a disabled or disconnected ionizer.Local status lights and an optional remote monitor provide clear operating indication.
تطبيقات نموذجية
Semiconductor mini-environmentsWafer and substrate handling stationsCleanroom assembly benchesPrecision film and electronics processing
المعلمات الفنية
Typical configuration values for a cleanroom ionizing bar system are listed below.
| المواد الأساسية | Low-outgassing engineering polymer housing with silicon emitter points and stainless steel mounting hardware |
|---|---|
| سمك اللوحة | 2-4 mm housing wall thickness |
| العرض الفعال | 300-2400 mm active ionizing length |
| الحد الأقصى الطول | Up to 2500 mm overall bar length |
| الصلب يواجه سمك | 1.0-1.5 mm stainless steel mounting clips |
| الكثافة الأساسية | 1150-1450 kg/m³ for engineering polymer housing material |
| الموصلية الحرارية | 0.20-0.35 W/(m·K) for polymer housing material |
| إنهاء السطح | Smooth white low-outgassing housing with passivated stainless hardware |
| نوع المشترك | Modular emitter bar with sealed end connections, adjustable clips and plug-in controller interface |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Multiple active bar lengthsClean dry air-assisted configurationRemote alarm and monitoring outputTitanium or silicon emitter points
Planning a Ionizing Bar System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
