영어
포르투갈어
스페인어
말레이어
인도네시아어
독일어
터키어
베트남어
프랑스어
러시아어
아랍어
태국어
일본어
한국어현재 Current
상품 소개
하이 씰 스테인레스 스틸 패스 박스는 도어 씰링 및 청소 가능한 구조가 모두 중요한 견고한 재료 전송 인클로저를 제공합니다. 용접 된 스테인레스 챔버, 코브 모서리 및 압축 개스킷 도어 잎은 부드러운 내부 엔벨로프를 형성하는 반면 모니터링 된 인터록은 양면이 함께 열리지 않도록합니다. 장치의 서비스 수명 동안 일상적인 유지 보수를 지원하기 위해 래치 조정 및 개스킷 교체를 지정할 수 있습니다.
주요 기능
Compression latches draw each door against its perimeter gasket.
Door-position indication shows which transfer side is in use.
형성된 내부 반경은 챔버 표면을 더 직접적으로 닦아줍니다.
Replaceable seals allow worn closure components to be renewed.
응용 프로그램 솔루션
A gasketed transfer enclosure should be easy to close consistently, wipe thoroughly and maintain after repeated handling.
A worn or poorly seated gasket leaves an irregular closure.A continuous replaceable seal and adjustable latch engagement allow the seating contact to be restored during maintenance.
Internal joints can retain residue from transferred packs.The welded liner presents fewer open seams for routine wiping.
Operators cannot see whether the opposite side is already in use.Door-position indication makes the transfer sequence visible before a release is requested.
Cleaning chemicals can shorten the life of an incompatible seal.The replaceable gasket compound can be selected for the cleaning regime without changing the stainless chamber.
일반적인 응용 프로그램
Packaged pharmaceutical suppliesCleanroom tool handoverMedical-device production supportSealed non-hazardous laboratory containers
기술 매개변수
The specifications below are selectable common reference configurations for a gasketed stainless steel pass box, not measured performance for one fixed STjh model. The reference construction is a static chamber with compression seals and an electronic door interlock; material and finish upgrades are optional.
| 건축 자재 | AISI 304 stainless steel; AISI 316L stainless steel optional |
|---|---|
| Internal Chamber Size (W × D × H) | 500 × 500 × 500 mm or 600 × 600 × 600 mm |
| 챔버 건설 | Continuously welded stainless steel enclosure |
| Door Seals | Continuous compressible perimeter gaskets |
| Door Closure | Manually operated compression-latch doors |
| 인터록 | Electronic two-door interlock with door-status indication |
| Internal Corners | Radiused, coved liner |
| 표면 마무리 | Brushed stainless steel; electropolished finish optional |
| 설치 | Through-wall mounting with perimeter frame or flanges |
| 사용자 정의 | 의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다. |
사용 가능한 옵션
AISI 316L stainless steelElectropolished internal surfaces벽 클램핑 설치 프레임Audible door-open alert
Selection and Installation
Choose the chamber around the largest packaged item, including room for hands to place and retrieve it without catching the door gasket. A compression seal needs a flat seating face, aligned hinges and correctly adjusted latches; these details matter more than the marketing term high-seal. Gasket material should suit the cleaning chemicals and service temperature.
Support the enclosure independently where the partition cannot carry its weight, and seal the wall-to-frame joint without obstructing door or service access. Check both door-status indications and the interlock sequence before use. Electronic controls require an electrical supply; voltage and loss-of-power operation should match the selected control package.
This configuration is for routine transfer of non-hazardous packaged materials. A specified air-leakage limit, hazardous-material containment duty or dry-room moisture limit needs a separately verified design. For supply batches that must remain organised on several levels, consider a pass-through storage cabinet.
하이 씰 스테인레스 스틸 패스 박스 사양을 계획합니까?
치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.
