Three-quarter underside view of the modular cleanroom laminar flow ceiling with a nine-panel diffuser array

클린룸 공기 분배 시스템

클린룸 레이미널 흐름 천장

A modular ceiling assembly for terminal HEPA filtration and downward air supply across a defined clean process area.

Terminal HEPA Filtration
Broad Downward Air Supply
Modular Plenum Assembly
Diffuser and Lighting Options

견적 요청 제품 찾아보기

상품 소개

The cleanroom laminar flow ceiling combines a sealed supply plenum, multiple terminal HEPA filters and a perforated or textile diffuser surface above the process area. Its modular sections form a ceiling-level air-distribution assembly connected to an upstream air-handling system. Filter-cell joints, module connections and perimeter seals are part of the construction. The layout can incorporate lighting bays and service openings while reserving access to the filters and diffuser sections.

주요 기능

A bank of terminal filter cells serves a wider process footprint than a single ceiling outlet.

Perforated and textile discharge surfaces offer different diffuser construction choices.

Sectional frames provide defined joints for assembly and perimeter sealing.

Lighting bays and service cutouts can be incorporated into the selected ceiling layout.

응용 프로그램 솔루션

A large clean-air ceiling must fit the work area and remain accessible throughout its service life.

Lights and equipment supports compete with filter space.Map obstructions before selecting the active supply footprint and the locations of blank or service bays.

Unequal inlet pressure can produce different discharge velocities across the array.Match duct connections and balancing provisions to the module layout, then measure the installed airflow rather than relying on a single inlet reading.

A filter replacement route is blocked by suspended equipment.Choose diffuser section sizes and a filter-release arrangement that remain accessible in the completed room.

Unsealed penetrations create bypass paths around the final filters.Include continuous perimeter seals and sealed service interfaces in the installation scope.

일반적인 응용 프로그램

Sterile pharmaceutical filling zones병원 수술실Aseptic product assemblyOpen process protection in biotechnologyPrecision microelectronics work areas

기술 매개변수

Common ceiling-canopy formats and construction options for a duct-supplied clean-air zone.

조립 유형	Modular ceiling plenum with an array of terminal HEPA filter cells
Common Nominal Coverage Formats	1800 × 2400 mm or 2400 × 2400 mm; larger coverage assembled in modular sections
Typical Plenum Assembly Depth	Approximately 400–450 mm for conventional duct-fed canopy configurations
Filter Options	H13 or H14 HEPA filter configurations
Air Supply Arrangement	Duct-fed pressure plenum supplying downward airflow through the filter and diffuser assembly
디퓨저 옵션	Perforated metal face or tensioned textile surface
Housing Finish Options	White powder-coated steel or brushed stainless steel
Air Supply Connection Options	Rectangular side-entry duct spigots with single or multiple supply connections
Module Connections	Bolted, gasketed sections with sealed perimeter and service interfaces
Filter Seal Options	Gel-seal or gasket-seal filter interfaces
Service Integration Options	Sealed lighting modules and planned openings for ceiling-mounted equipment
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Perforated metal or tensioned textile diffuserSealed lighting baysGel-seal or gasket-seal filter interfacePerimeter skirts and equipment-service openings

Include each required accessory in the quotation; these items are not implied by the base ceiling description.

Selection and Installation

Define the protected footprint

For an enquiry, provide the process or operating-table layout, the required clean-air footprint, ceiling height and available installation depth. Include the positions of lights, pendants, rails and other obstructions. These details determine the module arrangement and accessible filter-replacement areas.

Match the ceiling to its air supply

State the required airflow, the target velocity and measurement plane, and the pressure available from the air-handling system. Select the filter grade, diffuser type and duct-inlet layout together. This duct-fed assembly needs a compatible upstream air supply; where integral fans are required, compare a ceiling fan filter unit.

Separate the assembly from optional accessories

The product described here is the plenum, terminal-filter and diffuser assembly. Identify the required material and filter seal in the quotation. Lighting, perimeter skirts, special service cutouts and monitoring accessories should be listed separately, along with the scope of ductwork and supporting steelwork.

Allow for servicing and room-level verification

Use the supplied installation drawing to locate supports and seal the ceiling perimeter and service penetrations. Leave space to remove diffuser sections and filters without contacting the filter media. After installation or filter replacement, check filter integrity and the airflow pattern in the completed room. Equipment, heat sources and room returns can disturb the downward field; the ceiling alone does not establish room classification or a sterile operating environment.

Planning a Cleanroom Laminar Flow Ceiling specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.