Compact benchtop laminar flow hood on a stainless work surface

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

Benchtop Laminar Flow Hood (벤치탑 레이미널 흐름 후드)

기존 테이블 위에 설치하여 소형 비유해 제품과 기구를 위한 국소 청정 공기 구역을 만드는 일체형 여과 후드입니다.

Tabletop Installation
Self-Contained Fan Filter
Clear Side Panels
Portable Compact Format

견적 요청 제품 찾아보기

상품 소개

This compact hood brings a fan, prefilter, HEPA stage and protected work opening into one tabletop enclosure. Clear side panels maintain visibility while limiting room cross-drafts, and the base seals to a clean laboratory table or optional stainless tray. The lightweight format can be relocated between compatible benches after electrical isolation and cleaning. It is intended for small non-hazardous tasks and does not provide personnel protection from aerosols, chemicals or biological agents.

주요 기능

A self-contained filter housing avoids a remote duct or ceiling connection.

Transparent side walls preserve visibility around small instruments.

The narrow base fits standard laboratory tables and existing casework.

A removable lower tray can provide a defined cleanable work surface.

Top or rear prefilter access keeps routine service outside the working opening.

응용 프로그램 솔루션

A localized clean-air task may not justify a full freestanding bench, but the hood still needs a stable base and undisturbed airflow.

Existing tables differ in surface quality and cleanliness.An optional stainless base tray creates a consistent work surface beneath the hood.

A full-size clean bench cannot fit a small instrument room.The compact self-contained enclosure uses the existing tabletop footprint.

Side drafts disrupt a small open work zone.Clear side panels shield the filtered air path without blocking visibility.

Users may mistake a clean hood for a containment device.Application labeling states that the hood is for non-hazardous product protection only.

일반적인 응용 프로그램

Small optical assemblyNon-hazardous sample aliquotingClean sensor packagingMicroscope accessory preparation

기술 매개변수

Typical configurable construction ranges for a benchtop laminar flow hood are listed below.

핵심 재료	Anodized aluminum frame with powder-coated steel filter housing and clear polycarbonate side panels
패널 두께	20-30 mm framed housing sections
유효 폭	600-1200 mm clear working width
최대 길이	Up to 900 mm overall hood depth
강철 면면 두께	0.8-1.0 mm powder-coated steel filter housing
코어 밀도	Approximately 1200 kg/m³ for solid polycarbonate side panels
열전도도 (Thermal Conductivity)	0. 19 - 0. 22 W / (m · K) 폴리카보네이트 패널
표면 마무리	Clear hard-coated panels, natural anodized aluminum and white powder-coated filter housing
접합 유형	Gasketed modular frame with sealed filter clamp and removable base tray
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Vertical or horizontal airflowStainless base trayLED task lightPortable support stand

Planning a Benchtop Laminar Flow Hood specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.