Aliran Laminar dan Peralatan Pengekangan

Benchtop Laminar Flow Hood

Hud berpenapis kendiri yang diletakkan di atas meja sedia ada untuk mewujudkan zon udara bersih setempat bagi produk kecil tidak berbahaya dan instrumen.

Tabletop Installation
Self-Contained Fan Filter
Clear Side Panels
Portable Compact Format

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This compact hood brings a fan, prefilter, HEPA stage and protected work opening into one tabletop enclosure. Clear side panels maintain visibility while limiting room cross-drafts, and the base seals to a clean laboratory table or optional stainless tray. The lightweight format can be relocated between compatible benches after electrical isolation and cleaning. It is intended for small non-hazardous tasks and does not provide personnel protection from aerosols, chemicals or biological agents.

Ciri-ciri Utama

A self-contained filter housing avoids a remote duct or ceiling connection.

Transparent side walls preserve visibility around small instruments.

The narrow base fits standard laboratory tables and existing casework.

A removable lower tray can provide a defined cleanable work surface.

Top or rear prefilter access keeps routine service outside the working opening.

Penyelesaian untuk permohonan anda

A localized clean-air task may not justify a full freestanding bench, but the hood still needs a stable base and undisturbed airflow.

Existing tables differ in surface quality and cleanliness.An optional stainless base tray creates a consistent work surface beneath the hood.

A full-size clean bench cannot fit a small instrument room.The compact self-contained enclosure uses the existing tabletop footprint.

Side drafts disrupt a small open work zone.Clear side panels shield the filtered air path without blocking visibility.

Users may mistake a clean hood for a containment device.Application labeling states that the hood is for non-hazardous product protection only.

Permohonan yang biasa

Small optical assemblyNon-hazardous sample aliquotingClean sensor packagingMicroscope accessory preparation

Parameter teknikal

Typical configurable construction ranges for a benchtop laminar flow hood are listed below.

Bahan Teras	Anodized aluminum frame with powder-coated steel filter housing and clear polycarbonate side panels
Ketebalan Panel	20-30 mm framed housing sections
Lebar berkesan	600-1200 mm clear working width
Panjang maksimum	Up to 900 mm overall hood depth
Keluli Menghadapi Ketebalan	0.8-1.0 mm powder-coated steel filter housing
Ketumpatan teras	Approximately 1200 kg/m³ for solid polycarbonate side panels
Kekonduksian Terma	0.19-0.22 W / (m · K) untuk panel polikarbonat
Kemasan permukaan	Clear hard-coated panels, natural anodized aluminum and white powder-coated filter housing
Jenis Bersatu	Gasketed modular frame with sealed filter clamp and removable base tray
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Vertical or horizontal airflowStainless base trayLED task lightPortable support stand

Planning a Benchtop Laminar Flow Hood specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami