Complete airtight cleanroom swing door with sealed flush frame

클린룸 도어, 창문 및 인터락 시스템

청정실 스윙 도어

A pressure-control swing doorset with a rigid insulated leaf, continuous EPDM frame seals and a concealed automatic bottom seal that closes the threshold gap.

Four-Side Sealing Strategy
Automatic Bottom Drop Seal
Rigid Insulated Leaf
Threshold-Free Passage

견적 요청 제품 찾아보기

상품 소개

The Airtight Cleanroom Swing Door controls leakage through the doorway by combining accurate leaf-to-frame alignment with compressible seals along the head, jambs and threshold. The bottom seal retracts while the door moves and drops against the finished floor when closed. A stiff polyurethane-cored leaf keeps the gasket contact plane straight, while adjustable hinges and closer force allow compression to be maintained without excessive manual effort.

주요 기능

Continuous jamb and head gaskets limit bypass paths around the closed leaf.

A concealed drop seal closes the floor gap without a permanent raised threshold.

Rigid closed-cell insulation helps maintain a straight sealing edge over the leaf height.

Adjustable hinges compensate for settlement and restore uniform gasket compression.

Flush vision panels and interlock magnets can be integrated without exposed cavities.

응용 프로그램 솔루션

Airtight swing doors must reduce leakage without becoming difficult to operate or introducing thresholds that obstruct carts and cleaning equipment.

Air escapes through the floor gap even when jamb seals are compressed.The automatic drop seal lowers across the full leaf width only after closing.

Excessive gasket compression makes the door hard to latch.Matched seal hardness, adjustable hinges and controlled closer force create repeatable contact.

A raised threshold disrupts trolley passage and floor cleaning.A retracting bottom seal works against the flat finished floor without a permanent sill.

Leaf warping creates isolated leakage points along one jamb.A rigid foam core and reinforced perimeter preserve a consistent sealing plane.

일반적인 응용 프로그램

인원 AirlockSterile compounding suitesPressure-cascade laboratoriesIsolation support roomsHigh-containment change areas

기술 매개변수

Representative construction values for a gasketed airtight cleanroom swing door are listed below.

핵심 재료	Closed-cell rigid polyurethane foam
패널 두께	50 mm door leaf
유효 폭	800-1200 mm single-leaf clear opening
최대 길이	2400 mm 최대 잎 높이
강철 면면 두께	0.8-1.0mm 분말 코팅 아연 도금 강철 스킨
코어 밀도	40-45 kg/m³ polyurethane
열전도도 (Thermal Conductivity)	0.022-0.028 W/(m·K) typical polyurethane core range
표면 마무리	Smooth powder-coated steel with flush sealed trims
접합 유형	Three-sided EPDM compression gasket plus concealed automatic bottom drop seal
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Magnetic perimeter sealsInterlock-ready flush maglockHands-free automatic openerDouble-glazed observation window

Planning a Airtight Cleanroom Swing Door specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.