Complete airtight cleanroom swing door with sealed flush frame

أبواب الغرف النظيفة ونوافذ وأنظمة التشابك

Airtight غرف نظيفة سوينغ الباب

A pressure-control swing doorset with a rigid insulated leaf, continuous EPDM frame seals and a concealed automatic bottom seal that closes the threshold gap.

Four-Side Sealing Strategy
Automatic Bottom Drop Seal
Rigid Insulated Leaf
Threshold-Free Passage

طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

The Airtight Cleanroom Swing Door controls leakage through the doorway by combining accurate leaf-to-frame alignment with compressible seals along the head, jambs and threshold. The bottom seal retracts while the door moves and drops against the finished floor when closed. A stiff polyurethane-cored leaf keeps the gasket contact plane straight, while adjustable hinges and closer force allow compression to be maintained without excessive manual effort.

الخصائص الرئيسية

Continuous jamb and head gaskets limit bypass paths around the closed leaf.

A concealed drop seal closes the floor gap without a permanent raised threshold.

Rigid closed-cell insulation helps maintain a straight sealing edge over the leaf height.

Adjustable hinges compensate for settlement and restore uniform gasket compression.

Flush vision panels and interlock magnets can be integrated without exposed cavities.

حلول للتطبيق الخاص بك

Airtight swing doors must reduce leakage without becoming difficult to operate or introducing thresholds that obstruct carts and cleaning equipment.

Air escapes through the floor gap even when jamb seals are compressed.The automatic drop seal lowers across the full leaf width only after closing.

Excessive gasket compression makes the door hard to latch.Matched seal hardness, adjustable hinges and controlled closer force create repeatable contact.

A raised threshold disrupts trolley passage and floor cleaning.A retracting bottom seal works against the flat finished floor without a permanent sill.

Leaf warping creates isolated leakage points along one jamb.A rigid foam core and reinforced perimeter preserve a consistent sealing plane.

تطبيقات نموذجية

Airlocks الموظفينSterile compounding suitesPressure-cascade laboratoriesIsolation support roomsHigh-containment change areas

المعلمات الفنية

Representative construction values for a gasketed airtight cleanroom swing door are listed below.

المواد الأساسية	رغوة البولي يوريثان الصلبة المغلقة الخلية
سمك اللوحة	50 في ورقة الباب
العرض الفعال	، فتحة واضحة من ورقة واحدة
الحد الأقصى الطول	أعلى ارتفاع ورقة شجر
الصلب يواجه سمك	0.8-1.0 mm powder-coated galvanized steel skins
الكثافة الأساسية	40-45 kg/m³ polyurethane
الموصلية الحرارية	مجموعة أساسية من البولي يوريثين النموذجية (m · K)
إنهاء السطح	Smooth powder-coated steel with flush sealed trims
نوع المشترك	Three-sided EPDM compression gasket plus concealed automatic bottom drop seal
التخصيص	متاح بناءً على التطبيق المقصود وبيئة التشغيل

الخيارات المتاحة

Magnetic perimeter sealsInterlock-ready flush maglockHands-free automatic openerDouble-glazed observation window

Planning a Airtight Cleanroom Swing Door specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا