STJH-PLEATED-PRE-FILTER-COARSE65-48

Pleated Pre-Filter 48 mm ISO Coarse 65%

A standard two-inch coarse pleated panel for routine coil and secondary-filter protection.

48 mm standard depth
ISO Coarse 65%
Wire-backed synthetic pleats

商品紹介

This 592 × 592 mm pre-filter places synthetic medium in radial pleats supported by corrosion-resistant wire. The 48 mm galvanized steel frame fits standard shallow panel tracks, while ISO Coarse 65% performance provides practical first-stage protection. Its compact depth is intended for routine cleanroom AHU service where filter-bank space is limited.

主要な特徴

Shallow pleated format

The two-inch frame adds media area over a flat mat without requiring a deep pre-filter section.

Corrosion-resistant support

Wire backing holds radial pleats in place through normal airflow and handling.

Recyclable metal frame

The galvanized enclosure provides a rigid perimeter and a defined rack interface.

技術的なパラメータ

Face Dimensions	592 × 592 mm
Nominal Depth	48 mm
Efficiency Class	ISO Coarse 65%
Filter Media	Synthetic fiber
Pleat Layout	Radial pleats
Media Support	Corrosion-resistant wire backing
Frame Material	Galvanized steel
Module Format	Full-size shallow panel
Primary Function	Coil and downstream-filter protection
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Used as a first-stage filter in cleanroom make-up-air units, general production AHUs and equipment ventilation. The 48 mm format protects coils and secondary filters where only a shallow standard panel track is available.

Solutions for Your Application

A flat mat lacks enough media area for the desired service interval.The radial pleats increase exposed synthetic media within the same shallow filter face.

A deep pre-filter blocks access to coils or the next filter stage.The 48 mm frame preserves downstream cabinet clearance while providing ISO Coarse 65% performance.

利用可能なオプション

Confirm face dimensions, galvanized frame profile, gasket requirement and airflow orientation for the panel rack.

Planning a Pleated Pre-Filter 48 mm ISO Coarse 65% specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する