STJH-MOTORIZED-VOLUME-CONTROL-DAMPER-1000X840-20NM

Motorized Volume Control Damper 1000 x 840 mm Opposed-Blade 20 Nm

Medium-large opposed-blade control with a 20 Nm actuator.

Drive selection covers the 15 Nm minimum torque.
Analogue modulation supports changing trunk airflow demand.

商品紹介

The 1000 mm-wide casing carries a deeper blade bank for larger rectangular branches. Its selected drive exceeds the listed minimum torque for this opening, while the external linkage preserves access to the moving mechanism outside the main air path.

主要な特徴

Drive selection covers the 15 Nm minimum torque.
Analogue modulation supports changing trunk airflow demand.

技術的なパラメータ

Opening Size	1000 × 840 mm
Casing	Galvanized steel
Blade Geometry	Opposed aerofoil
Required Minimum Torque	15 Nm
Actuator Output Torque	20 Nm
Power Input	24 V AC/DC
Demand Signal	2–10 V DC
Feedback Signal	2–10 V DC
Actuator Enclosure	IP54
カスタマイズ	Available for the intended medium-large duct application and environment.

Applications

Medium-large cleanroom supply trunks
Modulating return-air branches

Solutions for Your Application

A small actuator may stall on a wider blade bank.

The 20 Nm selection provides capacity above the opening's published minimum.

Maintenance staff need access to the drive train.

The actuator and blade linkage are located outside the duct opening.

利用可能なオプション

End-position indication
Bearing and seal selections

Planning a Motorized Volume Control Damper 1000 x 840 mm Opposed-Blade 20 Nm specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する