STjh 23 by 53 inch mobile FFU with prefilter return grille, airflow sensor and push handles

STJH-MOBILE-FAN-FILTER-UNIT-23X53-120V

Mobile Fan Filter Cart 23.5 × 52.7 in 120 V

A narrow wheeled 120 V filter cart with onboard airflow sensing and selectable HEPA or ULPA filtration.

23.5 in narrow mobile footprint
Adjustable controller with airflow sensor
Selectable HEPA or ULPA filter pack

商品紹介

This mobile fan filter cart uses a narrow 23.5 in body and an overall height of 52.6875 in for deployment through occupied healthcare, laboratory and cleanroom spaces. The 304L stainless enclosure includes an adjustable face controller, airflow sensor and prefilter return grille, distinguishing it from the simpler recirculating and reverse-flow carts. It operates from 120 VAC at 2.8 full-load amps and rolls on 3 in swivel casters with push/pull handles.

主要な特徴

Narrow transport geometry

The 23.5 in width supports movement through occupied corridors and placement beside constrained work zones.

Onboard airflow feedback

An airflow sensor and adjustable face controller provide local operating information and adjustment at the cart.

Protected return path

The prefilter return grille captures larger debris before air reaches the selected HEPA or ULPA pack.

技術的なパラメータ

Overall Width	23.5 in
Overall Height	52.6875 in
Housing Material	304L stainless steel
Power Supply	120 VAC
Full-Load Current	2.8 A
Final Filter Options	HEPA or ULPA pack
Return-Air Stage	Prefilter grille
Controls	Adjustable face controller with airflow sensor
Mobility	3 in swivel casters with push/pull handles
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Suitable for healthcare rooms, laboratories, cleanroom support areas and temporary production zones where a narrow mobile cabinet is preferred. The cart should be parked with the return grille and filtered discharge unobstructed, and wheel position should be secured during operation.

Solutions for Your Application

A wide mobile purifier is difficult to move through occupied corridors or place beside equipment.Use the 23.5 in wide cart and push/pull handles to position the unit within the available route.

Operators need a clear way to adjust and confirm fan output at the unit.Use the onboard face controller and airflow sensor while verifying actual room performance at the selected setting.

利用可能なオプション

Select the HEPA or ULPA filter pack, controller arrangement, cord and plug, caster braking details and handle orientation. Final placement should suit the intended circulation path and cleaning procedure.

Planning a Mobile Fan Filter Cart 23.5 × 52.7 in 120 V specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する