STJH-GEL-SEAL-HEPA-H13-53

Gel-Seal HEPA Filter 53 mm H13

A shallow H13 panel combining a 53 mm mini-pleat pack with an integral fluid-seal trough.

53 mm shallow H13 pack
Integral elastic gel trough
Bottom-load housing interface

商品紹介

This H13 mini-pleat filter uses a 53 mm microglass pack in an anodized aluminum frame with an integral trough of elastic gel. The seal is designed for a compatible bottom-load housing whose knife edge enters the fluid channel. The slim construction is intended for low-profile cleanroom terminals where a gasketed frame or deeper pack would consume too much plenum space.

主要な特徴

Shallow fluid-seal design

The model combines minimal pack depth with a continuous gel interface around the frame.

Knife-edge engagement

A compatible housing edge penetrates the elastic gel to close the perimeter air path.

Protected room-side handling

The rigid anodized frame supports the thin medium during controlled bottom-load replacement.

技術的なパラメータ

Filter Pack Depth	53 mm
Efficiency Grade	H13
Media Type	Microglass mini-pleat
Frame Material	Anodized aluminum
Seal Construction	Integral elastic gel trough
Housing Style	Compatible bottom-load knife-edge terminal
Panel Profile	Low-depth cleanroom filter
Access Direction	Room-side or bottom-side according to housing
Primary Use	Low-profile terminal final filtration
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

Suitable for compact terminal housings, clean benches and low-plenum cleanroom ceilings that use a bottom-load knife-edge seal. It is selected when H13 performance and a fluid perimeter interface are required in the shallowest gel-seal package.

Solutions for Your Application

The terminal has insufficient depth for a conventional gel-seal HEPA pack.The 53 mm model minimizes media-pack depth while retaining an integral trough.

The knife edge cuts or displaces gel during installation.Align the filter evenly, lower the housing edge into the center of the trough and avoid lateral sliding.

利用可能なオプション

Confirm face dimensions, gel type, trough position, faceguard and exact knife-edge profile before manufacture.

Planning a Gel-Seal HEPA Filter 53 mm H13 specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する