STJH-EXHAUST-HEPA-HOUSING-SAFESCAN

Exhaust HEPA Filter Housing In-Situ Scan

A critical exhaust cabinet that enables repeatable installed HEPA scanning while the contaminated side remains closed.

Integral full-face scan
Closed dirty-side testing
BIBO-compatible stainless cabinet

商品紹介

This containment housing integrates a scan mechanism that traverses the HEPA face and perimeter from the protected side. The test can therefore assess local filter and seal leakage without opening the contaminated pressure boundary. Fully welded stainless construction and BIBO-compatible service make it suitable for installations where both repeatable validation and controlled filter change are required, rather than only a single upstream challenge and downstream bulk reading.

主要な特徴

Localized integrity testing

The scan head surveys the media face and perimeter instead of averaging leakage across the entire downstream flow.

Contained validation

Testing hardware operates without exposing the contaminated side of the filter housing.

Welded stainless boundary

A continuous metal cabinet supports critical exhaust pressure and frequent decontamination routines.

技術的なパラメータ

Housing Material	Fully welded stainless steel
Filter Type	HEPA
Testing Method	Integral in-situ full-face and perimeter scan
Change System	BIBO compatible
Access	Protected-side service and scan controls
Primary Duty	Critical containment exhaust
Seal Interface	Gasket or gel by selected filter
Test Inputs	Challenge and measurement ports
Validation Benefit	Local leak location without dirty-side opening
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

Applications

For biosafety, pharmaceutical and high-containment facilities that require repeatable installed HEPA validation under a closed contamination boundary.

Solutions for Your Application

A bulk aerosol reading can pass even when a small local leak remains near the filter perimeter.Use the integral scan path to traverse both the media face and seal boundary at the specified probe speed.

The scan mechanism cannot cover the complete face after duct accessories are installed.Verify travel limits, test-port access and service clearance during housing coordination before connecting adjacent sections.

利用可能なオプション

Confirm filter dimensions, seal type, scan method, challenge aerosol, stainless grade, BIBO bag, ports, controls and airflow orientation.

Planning a Exhaust HEPA Filter Housing In-Situ Scan specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する