High-potency containment isolator complete three-quarter view with four glove ports and transfer chamber

業界特有のクリーンルーム機器

高電位封じ込めのアイソレータ

A negative-pressure stainless-steel isolator that separates operators from potent compounds during weighing, charging, sampling and other powder-handling operations.

Negative-Pressure Barrier
Double Exhaust Filtration
Integrated Transfer Chamber
Glove-Based Process Access

見積もりリクエスト製品案内

商品紹介

The high-potency containment isolator combines a welded stainless enclosure, sealed viewing panels and glove access with controlled inward airflow. A staged transfer chamber supports material entry and removal without opening the principal process zone directly to the room. Dedicated inlet and exhaust filtration, pressure monitoring and a cleanable lower utility section support repeatable potent-compound handling while keeping process equipment visible and accessible.

主要な特徴

Negative chamber pressure promotes inward leakage at the containment boundary.

Two-stage exhaust filtration provides a redundant barrier for airborne powder.

Four glove ports give operators reach across the three-panel working chamber.

A gasketed side transfer chamber separates material movement from the primary workspace.

アプリケーションのソリューション

Highly potent powders can migrate through open handling steps, expose personnel and make product changeover difficult to control.

Open scooping or charging can disperse potent dust into the room.A sealed negative-pressure chamber keeps manipulation behind glass and glove barriers.

Removing tools or containers can breach the primary workspace.The interlocked side chamber stages transfers before either boundary door is opened.

A single exhaust element offers limited protection during filter loading.Series exhaust stages and monitored airflow provide a more robust airborne-powder barrier.

Residue trapped around fittings lengthens campaign changeover.Smooth stainless surfaces, rounded internal transitions and accessible service connections support wash-down and inspection.

典型的な用途

HPAPI dispensing and weighingPotent powder samplingContained reactor or granulator chargingOncology solid-dose development

技術的なパラメータ

Typical configurable construction values for a multi-glove high-potency containment isolator are listed below.

コア材料	Welded 316L stainless-steel chamber with laminated safety glass and black butyl gloves
パネルの厚さ	50-100 mm insulated enclosure sections
有効幅	1800-2600 mm usable chamber width
最大長さ	Up to 3200 mm overall equipment length
鋼鉄の厚さを直面する	2-3 mm chamber wall and work-surface construction
コア密度	7950-ステンレス钢の建设のための8050 kg/mの ³
熱伝導率	オーステナイト系ステンレス钢のための14-16 W/(m・K)
表面仕上げ	Satin exterior with smooth mechanically polished product-contact interior
ジョイントタイプ	Fully welded chamber with gasketed viewing panels, glove rings and interlocked transfer doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Integrated wash-in-place spray systemBag-in/bag-out exhaust filter housingsRapid transfer or split butterfly valve interfacesApplication-specific process equipment integration

Planning a High-Potency Containment Isolator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する