Complete emergency eyewash station in three-quarter view with twin protected nozzles and stainless bowl

クリーンルーム排水 · 衛生 · 安全設備

Eemergency アイウォッシュステーション

A plumbed twin-nozzle eyewash with a stay-open valve and high-visibility activation for immediate ocular flushing.

Twin Controlled Flushing Streams
Single-Motion Stay-Open Valve
Protected Nozzle Heads
Visible Safety-Green Activation

商品紹介

The emergency eyewash station supplies two controlled flushing streams from protected heads positioned above a stainless or chemical-resistant receptor. A large push flag opens a stay-open valve so the user can hold both eyelids without maintaining pressure on the control. The inlet strainer and flow controls stabilize nozzle output, while an open pedestal layout keeps the station visible and accessible near chemical handling areas.

主要な特徴

Twin dust-covered nozzles direct balanced flushing streams toward both eyes.

A large safety-green push flag opens a stay-open ball valve in one motion.

An inline strainer and integral flow controls reduce debris and pressure variation at the heads.

Stainless bowl, drain tailpiece and corrosion-resistant fittings support wet-area cleaning.

アプリケーションのソリューション

An exposed worker needs immediate, intuitive flushing with both hands free to hold the eyes open and no obstruction around the station.

Small or ambiguous controls delay activation during an exposure event.A large colored push flag gives an obvious single-motion control point.

The user cannot keep holding a valve while opening both eyelids.The stay-open valve continues flow until it is deliberately returned to the closed position.

Sediment and variable supply pressure can distort the flushing pattern.A line strainer and matched flow controls stabilize discharge at both heads.

Idle nozzles collect dust in controlled and industrial environments.Self-opening dust covers shield the outlets and release automatically when flow starts.

典型的な用途

Cleanroom chemical preparationLaboratory wet benchesBattery and utility roomsProcess chemical dispensing areas

技術的なパラメータ

Typical construction values for a plumbed pedestal emergency eyewash are shown below; supply temperature and flow capacity are selected for the facility emergency-water design.

コア材料	304 stainless receptor and pipework with chrome-plated brass valve components
パネルの厚さ	1.0-1.5 mm stainless receptor bowl
有効幅	280-400 mm receptor diameter
最大長さ	Up to 1200 mm overall station height
鋼鉄の厚さを直面する	1.0-1.5 mm stainless bowl and signage support
コア密度	ステンレス構造部品用7900-8000 kg/m³
熱伝導率	ステンレス部品用14-16 W/(m·K)
表面仕上げ	Bright or satin stainless with safety-green polymer controls
ジョイントタイプ	Threaded plumbed inlet and drain with stay-open ball valve and replaceable nozzle assemblies
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Stainless or safety-green receptorPedestal or wall installationLocal alarm flow switchTempered-water mixing assembly

Planning a Emergency Eyewash Station specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する