UV-C lamp safety timer controller with keyed switch and digital display

Cleanroom Lighting dan Peralatan Listrik

Lampu UV Timer Controller

A dedicated wall controller that sequences delayed start, timed UV-C operation, warnings and safety interlock inputs from one sealed panel.

Keyed Enable Control
Adjustable Cycle Timer
Delayed Start Warning
Door and Sensor Inputs

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The UV-C controller separates germicidal operation from ordinary room-light switching. Its cleanable front panel carries a key switch, timer display, start/stop controls and status indicators. Inside the enclosure, a contactor or relay output switches the UV-C load while low-voltage terminals accept door contacts, occupancy sensors, warning beacons and remote emergency-stop devices.

Fitur utama:

A keyed enable switch limits cycle initiation to authorized personnel.

The programmable delay provides a defined exit interval before lamp energization.

A digital display shows remaining treatment time and operating state.

Dedicated safety inputs interrupt the output when a monitored door opens or occupancy is detected.

Separate relay terminals operate external beacons and audible warnings.

Solusi untuk aplikasi Anda

A basic timer alone cannot manage warning, authorization and interruption functions required around an unattended UV-C cycle.

Anyone can start a germicidal circuit from a normal wall switch.A key-controlled enable stage restricts initiation to designated operators.

Personnel have no time to leave after pressing start.An adjustable countdown drives warnings before the power relay closes.

Opening a door does not stop an independent timer output.Hardwired safety inputs drop the UV-C contactor immediately on an interlock event.

The operator cannot see whether a cycle ended or was interrupted.Distinct display states report standby, delay, active, complete and fault conditions.

Aplikasi yang Tipis

Fixed UV-C room systemsPass-box germicidal circuitsDuct irradiation controlsLaboratory treatment rooms

Parameter teknis

Typical configurable construction ranges for a UV-C lamp safety timer controller are listed below.

Bahan inti	Powder-coated steel or stainless enclosure with programmable timer, contactor, control relays and membrane interface
Ketebalan Panel (Panel Thickness)	90-180 mm wall enclosure depth
Efektif lebar	180-400 mm front-panel width
Panjang maksimum	Up to 500 mm overall enclosure height
Baja menghadap ketebalan	1.0-1.5 mm formed steel or stainless enclosure panels
Kepadatan inti (core density)	Approximately 7900-8000 kg/m³ for a stainless enclosure version
Konduktivitas Termal (Thermal Conductivity)	14 - 16 W / (m · K) untuk kandang tahan karat
Permukaan selesai	White powder coat or fine-brushed stainless front with black display and colored status indicators
Jenis Bersama	Gasketed enclosure door with sealed membrane controls and separated power and low-voltage terminal blocks
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Wall flush or surface enclosureLocal or networked timerDoor, motion and emergency-stop inputsExternal beacon and buzzer outputs

Planning a UV Lamp Timer Controller specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami