Complete unequal double-leaf cleanroom door with narrow secondary leaf

Pintu Cleanroom, Jendela dan Sistem Interlock

Pintu Cleanroom Double-Leaf yang tidak sama

A leaf-and-a-half cleanroom doorset combining one full-size daily personnel leaf with a narrower inactive leaf that releases when occasional equipment needs a wider route.

Full-Size Daily Active Leaf
Narrow Secondary Access Leaf
Compact Wide-Opening Solution
Sealed Asymmetric Meeting Stile

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Unequal Double-Leaf Cleanroom Door provides equipment access without making both leaves oversized. The primary leaf operates like a normal single personnel door, while the narrow secondary leaf stays flush-bolted for routine use. Releasing it extends the clear opening for carts, cabinets or production equipment. Aluminum-honeycomb infill keeps the tall unequal leaves light and reduces the load on the asymmetric frame.

Fitur utama:

The active leaf retains familiar single-door operation for normal traffic.

A narrow secondary leaf adds width only when a larger load must pass.

Honeycomb construction limits hinge loads on both differently sized leaves.

An asymmetric overlapping seal closes the full central meeting line.

Concealed secondary-leaf bolts keep the everyday opening clear of extra hardware.

Solusi untuk aplikasi Anda

Leaf-and-a-half doors must give convenient daily access while keeping the secondary leaf secure, sealed and immediately available for larger loads.

A full double door consumes wall and swing space despite infrequent wide-access demand.The narrow secondary leaf adds occasional width while preserving a standard active leaf.

Staff release the wrong hardware when the secondary leaf is needed quickly.Accessible concealed flush bolts provide a direct top-and-bottom release sequence.

Differently sized leaves can sag and meet unevenly at the centre.Light honeycomb cores, reinforced hinges and adjustable alignment maintain the asymmetric joint.

The inactive leaf rattles under room pressure changes.Positive flush-bolt engagement and compressible meeting seals restrain the narrow leaf.

Aplikasi yang Tipis

Cleanroom personnel routes with occasional equipment transferLaboratory instrument roomsHealthcare equipment accessPackaging areasMaintenance access in compact corridors

Parameter teknis

Typical dimensions for a leaf-and-a-half cleanroom door arrangement are shown below.

Bahan inti	Bonded aluminum honeycomb in active and secondary leaves
Ketebalan Panel (Panel Thickness)	50 mm per door leaf
Efektif lebar	1200-1800 mm total clear opening
Panjang maksimum	2400 mm tinggi daun maksimum
Baja menghadap ketebalan	0.8-1.0 mm powder-coated galvanized steel skins
Kepadatan inti (core density)	40-70 kg/m³ aluminum honeycomb
Konduktivitas Termal (Thermal Conductivity)	0.06-0.10 W/(m·K) typical honeycomb core range
Permukaan selesai	Smooth powder-coated steel with matching sealed leaf edges
Jenis Bersama	Asymmetric paired leaves with gasketed astragal and concealed secondary-leaf flush bolts
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

300-600 mm secondary leafOne or two vision panelsLeaf coordinatorAutomatic drop seals

Planning a Unequal Double-Leaf Cleanroom Door specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami