Bahasa Inggris
Bahasa Portugis
Bahasa Spanyol
Bahasa Melayu
Bahasa IndonesiaSaat ini
Bahasa Jerman
Bahasa Turki
Bahasa Vietnam
Bahasa Perancis: Bahasa Perancis
Bahasa Rusia
Bahasa Arab
Bahasa Thailand
Bahasa Jepang
Bahasa Korea
Kontrol Cleanroom dan Sistem Pemantauan Lingkungan
Sensor gas beracun
A fixed electrochemical gas detector configured for a selected toxic gas and installed near credible release points in cleanroom support or process areas.
- Gas-Specific Sensor Cartridge
- Local and Remote Alarms
- Replaceable Electrochemical Cell
- Protected Diffusion Inlet
Perkenalan produk
The fixed toxic gas detector uses a gas-specific electrochemical cartridge selected for the target hazard, such as ammonia, chlorine, hydrogen sulfide or carbon monoxide. Ambient gas diffuses through a hydrophobic filter to the electrodes, generating a concentration-proportional signal. The transmitter provides local indication, configurable alarm relays and a standard analog or digital output. Sensor cartridges can be replaced independently of the housing, and optional remote sensing heads place the element closer to the expected release location.
Fitur utama:
A hydrophobic diffusion barrier protects the cell from droplets while admitting gas.
Independent warning and alarm thresholds operate local indicators and remote interlocks.
Replaceable cartridges and remote-head options simplify lifecycle and location changes.
Solusi untuk aplikasi Anda
Toxic gas monitoring must match the actual gas, likely release behavior and potential sensor cross-sensitivities rather than using one generic detector.
A detector selected for the wrong gas has weak or misleading response.A gas-specific cartridge is chosen for the target compound and expected concentration range.
The detector is mounted where air movement carries the gas away from it.Release analysis and gas-density behavior determine sensor position near credible accumulation paths.
Cross-sensitive vapors trigger nuisance alarms during cleaning.Gas-specific selection, alarm delay and known interference review reduce avoidable responses.
An expired cell remains installed because replacement requires rewiring.A plug-in sensor cartridge can be exchanged while retaining the mounted transmitter and field cable.
Aplikasi yang Tipis
Process gas cabinetsChemical storage support roomsSterilant handling areasClean utility equipment rooms
Parameter teknis
Typical construction values for a fixed cleanroom toxic gas detector are shown below.
| Bahan inti | Gas-specific electrochemical cartridge in powder-coated aluminum transmitter with stainless steel sensor guard |
|---|---|
| Ketebalan Panel (Panel Thickness) | 60-110 mm detector depth |
| Efektif lebar | 120-200 mm housing width |
| Panjang maksimum | Up to 280 mm detector height |
| Baja menghadap ketebalan | 0.5-1.0 mm stainless sensor guard and mounting plate |
| Kepadatan inti (core density) | 2650-2750 kg/m³ for aluminum transmitter body |
| Konduktivitas Termal (Thermal Conductivity) | 150-220 W/(m·K) for aluminum enclosure material |
| Permukaan selesai | White or light-gray powder-coated aluminum body with gas-specific color label, black display and red alarm indicator |
| Jenis Bersama | Plug-in diffusion cartridge with sealed cable entry and removable alarm-output terminal |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Gas-specific cartridge selectionLocal display and sounderRemote sensing headAnalog, relay or digital outputs
Planning a Toxic Gas Sensor specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
