Complete three-door cleanroom interlock system with controller and stations

Pintu Cleanroom, Jendela dan Sistem Interlock

Sistem Interlock Cleanroom Tiga Pintu

A three-channel airlock control package for vestibules with one common entrance and two controlled exits, or other cleanroom routes requiring defined three-door sequencing.

Three Independent Door Channels
Branching Airlock Logic
Configurable Door Groups
Individual Status Indication

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The three-door interlock system extends standard airlock logic to a branching layout. Each door has its own closed-position input, release output and request/status station, while the controller defines which combinations must remain mutually exclusive. This supports a common entry serving two process rooms, a personnel-and-material branch, or a three-sided transfer vestibule. Channel-specific indication helps occupants identify which route is available rather than treating every locked condition as the same fault.

Fitur utama:

Three independent sensor and lock channels support one common door and two destination doors.

Programmable grouping permits all-door mutual exclusion or selected route combinations.

Individual status outputs identify the requested door and the channel currently blocking release.

Separate held-open timers reveal which of the three doors has exceeded its permitted opening time.

Solusi untuk aplikasi Anda

Three-door layouts require unambiguous route logic because a simple pairwise interlock can create unintended releases or lock every exit unnecessarily.

A common entrance serves two clean rooms with different access paths.Three discrete channels apply the release rule to the selected branch instead of wiring separate controllers independently.

Users cannot tell which of two destination doors is available.Door-specific request and status indication shows each branch state locally.

Independent two-door relays create conflicting logic around the shared door.One controller evaluates all three door contacts before issuing any lock release.

Aplikasi yang Tipis

Branching personnel airlocksThree-sided material vestibulesShared gowning-room exitsLaboratory corridor transfer nodes

Parameter teknis

Typical construction and interface ranges for a three-door cleanroom interlock system are listed below.

Bahan inti	Three-channel programmable controller, power supply, relays, door contacts and operator stations
Ketebalan Panel (Panel Thickness)	90–150 mm controller enclosure depth
Efektif lebar	240–320 mm controller enclosure width
Panjang maksimum	400 mm controller enclosure height
Baja menghadap ketebalan	1.0–1.5 mm steel cabinet; stainless operator plates typically 1.2–2.0 mm
Kepadatan inti (core density)	Approximately 1800–1920 kg/m³ for the three-channel glass-reinforced PCB laminate
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.4–0.7 W/(m·K) for the channel-control PCB laminate
Permukaan selesai	Powder-coated control enclosure with labeled terminals and cleanroom-compatible operator stations
Jenis Bersama	Three hardwired door channels with configurable grouping, common emergency input and auxiliary dry contacts
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

All-door or branch-specific exclusion logicThree touchless request stationsIndependent door-held alarmsAccess-control and BMS status contacts

Planning a Three-Door Cleanroom Interlock System specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami