Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Access beneath the mat
A removable assembly allows the floor below to be inspected and cleaned without dismantling a permanent bonded lane.
STJH-REUSABLE-CLEANROOM-CONTAMINATION-CONTROL-MAT-FLOATING-1212
Reusable Cleanroom Contamination-Control Mat 1.2 m × 1.2 m Floating
A square reusable capture surface that can be lifted when the underlying floor needs attention.
- 1200 x 1200 mm square
- Removable floating assembly
- Washable polymer capture face
About This Product
The floating mat places a reusable polymer capture surface on an isolating backing rather than bonding the assembly permanently to the building floor. Its 1200 x 1200 mm footprint suits a compact personnel entrance or gowning position. The perimeter edging completes the removable unit, keeping the selected mat format distinct from a long bonded lane intended for repeated wheel contact.
Fitur utama:
Compact entry footprint
The square format can be positioned within a small doorway approach where a long capture strip would restrict circulation.
Reusable surface care
Collected soil is removed through washing, avoiding a stack of peel-off layers that must be replaced after loading.
Parameter teknis
| Capture Material | Reusable polymer |
|---|---|
| Plan Dimensions | 1200 x 1200 mm |
| Plan Area | 1.44 m² |
| Assembly Type | Floating mat |
| Backing | 1.58 mm isolator membrane |
| Floor Attachment | Removable, loose-laid assembly |
| Perimeter | Cold-welded edging |
| Maintenance | Wash and reuse |
| Primary Traffic | Personnel entrance contact |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Applications
Consider for gowning points, temporary controlled-area entrances and rooms where routine maintenance requires access to the original floor. Place the mat so that users naturally step across it, with adequate door clearance and no curled edges that could interrupt movement.
Solutions for Your Application
The entrance arrangement changes during room reconfiguration.
Use the removable square assembly and reposition it as the access route changes.
The capture surface becomes loaded before the end of a busy shift.
Set a washing frequency based on observed soil loading and allow the mat to dry before normal use resumes.
Pilihan yang tersedia
Specify the entry layout, preferred surface shade and edge arrangement. Confirm whether the unit must pass through a doorway for cleaning so that the selected removable format remains practical for the maintenance team.
Planning a Reusable Cleanroom Contamination-Control Mat 1.2 m × 1.2 m Floating specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
