Denser longitudinal treatment
Two additional wall banks and another ceiling zone reduce inactive gaps along the three-metre path.
This chamber retains the 1100 x 3000 x 2100 mm exterior of the 36-nozzle model but increases coverage to 54 jets. Six side-wall panels and three ceiling zones extend active discharge along the full 3000 mm path. The denser array is intended for one-to-four heavily gowned occupants or routes requiring more uniform longitudinal exposure.
Two additional wall banks and another ceiling zone reduce inactive gaps along the three-metre path.
Higher nozzle density is achieved without widening the 770 mm clear passage.
Interlocked entrance and exit doors contain the full one-to-four-person group during cleaning.
| External Size | 1100 x 3000 x 2100 mm |
|---|---|
| Passage | 770 x 3000 x 1935 mm |
| Group Capacity | 1-4 people |
| Total Air Nozzles | 54 |
| Side Panels | 6 active jet panels |
| Overhead Zones | 3 |
| Base Arrangement | Floorless |
| Door System | Interlocked aluminium doors |
| Incoming Power | AC 200 V, three phase, 50/60 Hz |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Selected for heavily gowned personnel, high-particle entry conditions and clean production transitions needing dense airflow coverage without a wider passage. Group spacing should align with the six wall sections.
Choose cycle program, jet aiming, section construction, doors, controls and cabinet material. Fan duty should be matched to the resistance of all active sections.
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.