STjh four-row half-inch hot-water reheat coil with a deeper tube bank and larger headers on white.

STJH-HOT-WATER-REHEAT-COIL-4ROW-12IN

Hot-Water Reheat Coil Four-Row 1/2-Inch

A medium-depth reheat core providing twice the tube-row depth of the compact terminal model.

Four-row reheat depth
Half- or full-circuit water path
Galvanized or stainless casing

Perkenalan produk

The four-row half-inch coil doubles the tube depth of the terminal reheat version and accepts half- or full-circuit water arrangements. It provides higher sensible recovery after a deep cooling or dehumidification stage while remaining smaller than the six-row large-tube option. Galvanized or stainless casing allows the core to be matched to dry or moisture-prone AHU sections.

Fitur utama:

Higher sensible recovery

Four tube rows add surface area for central AHU reheat after low-temperature cooling.

Circuit selection

Half- and full-circuit options balance water velocity, pressure loss and control range.

Wet-area casing option

Stainless construction can be selected when the reheat coil sits close to a condensate-producing section.

Parameter teknis

Tube Rows	4
Tube Outside Diameter	1/2 in
Water Circuit	Half or full circuit
Tube Material	Copper by standard duty
Fin Material	Aluminum
Casing	Galvanized or stainless steel
Fluid	Hot water
Control	Modulating valve by system design
Primary Duty	Central AHU reheat
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

For cleanroom AHU reheat after deep cooling, dehumidification or low-dew-point make-up-air treatment.

Solutions for Your Application

Water velocity is too low in a full circuit and air collects in upper tubes.Select half circuit where needed, provide an accessible vent and balance flow at design and minimum load.

The reheat coil remains wet from upstream carryover and corrodes the casing.Control wet-coil velocity, provide separation distance and choose stainless casing for persistent moisture exposure.

Pilihan yang tersedia

Specify face, capacity, water temperatures, circuit arrangement, tube wall, fin density, casing, coating and connection hand.

Planning a Hot-Water Reheat Coil Four-Row 1/2-Inch specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami