STjh mini white HEPA terminal housing with a deep square casing, small top inlet and black capped test port

STJH-HEPA-TERMINAL-HOUSING-MINI-346

HEPA Terminal Housing 346 mm Mini Top-Entry

A miniature top-entry HEPA terminal for small laboratories and compact isolation spaces.

346 mm square casing
150 mm top inlet
0.04-0.08 m³/s airflow

Perkenalan produk

This smallest terminal casing measures 346 x 346 x 370 mm and pairs with a 352 mm square diffuser. A 150 mm top spigot supplies 0.04-0.08 m³/s through the HEPA terminal at a cited clean pressure drop of 125-250 Pa. The compact inlet and airflow range distinguish it from standard 600 mm ceiling housings.

Fitur utama:

Miniature ceiling point

The small casing serves isolation spaces and laboratory zones that cannot accept a standard terminal.

Top-entry connection

A 150 mm spigot allows direct branch-duct connection above the housing.

Matched diffuser face

The 352 mm diffuser slightly overlaps the casing for a finished room-side interface.

Parameter teknis

Casing Dimensions	346 x 346 x 370 mm
Diffuser Dimensions	352 x 352 mm
Airflow Range	0.04-0.08 m³/s
Clean Pressure Drop	125-250 Pa
Standard Inlet	150 mm top spigot
Filter Type	HEPA terminal filter
Air Entry	Top
Discharge	Room-side diffuser
Installation	Small cleanroom ceiling supply point
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

Suitable for small cleanroom supply points, laboratory enclosures and compact isolation areas. Branch duct pressure should be set for the low published flow range.

Solutions for Your Application

A standard terminal overwhelms a very small room or enclosure.Use the 0.04-0.08 m³/s mini housing and 150 mm branch connection.

The diffuser must finish neatly at the small ceiling opening.Coordinate the 352 mm face with the 346 mm casing and ceiling cut-out.

Pilihan yang tersedia

Specify HEPA grade, diffuser pattern, casing finish, spigot position and room-side seal. Verify available duct pressure.

Planning a HEPA Terminal Housing 346 mm Mini Top-Entry specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami