STJH-AMMONIA-REMOVAL-MODULE-610X305X305

Ammonia Removal Filter 610 × 305 × 305 mm Chemisorption Module

A rigid 12-inch-deep module with a one-cubic-foot ammonia blend and 76.2 mm bed for sustained gas loading.

1.0 ft3 ammonia media
76.2 mm packed bed
299 Pa maximum at 1.27 m/s

Perkenalan produk

This 610 x 305 x 305 mm module is factory filled with an engineered Bathroom Odor & Ammonia chemisorption blend. Its 1.0 ft3 media charge forms a 76.2 mm packed bed, giving substantially more chemical inventory than the low-drop 152 mm-high alternative. The high-impact plastic body uses adhesive-free, gasket-free module interfaces and aerodynamic screens. At 1.27 m/s face velocity, pressure drop is specified not to exceed 299 Pa, so it suits systems prioritizing capacity over minimum resistance.

Fitur utama:

Sustained ammonia capacity

The one-cubic-foot media volume and three-inch bed provide the larger reactive inventory needed for continuous restroom, healthcare or process ammonia loads.

Bypass-resistant module tracking

Flat tongue-and-groove interfaces self-align adjacent modules without adding field gasket material between every cassette.

Accessible media sampling

A removable sampling port supports checking remaining chemical capacity before committing to a full module change.

Parameter teknis

Dimensions	610 x 305 x 305 mm
Chemisorption Media	Bathroom Odor & Ammonia engineered blend
Media Volume	1.0 ft3 / 0.028 m3
Packed Bed Depth	76.2 mm
Maximum Pressure Drop	299 Pa at 1.27 m/s face velocity
Frame Material	High-impact polystyrene
Module Interface	Tongue-and-groove self-sealing track
Operating Temperature	-20 to 51 C
Sampling Access	Removable media sampling port
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

For commercial, healthcare and process recirculation or exhaust systems with sustained ammonia and restroom-odor loads. The fan must accommodate the module resistance, and spent media should be changed based on sampling or downstream gas performance.

Solutions for Your Application

A low-capacity filter could require frequent replacement under continuous ammonia loading.Use the 1.0 ft3 packed-bed module where the calculated exposure and required service interval justify the greater media inventory.

The deeper chemical bed could overwhelm a lightly sized retrofit fan.Check the 299 Pa maximum at the stated face velocity and increase face area or choose the low-drop module if static pressure is limited.

Pilihan yang tersedia

Confirm ammonia concentration, odor co-contaminants, face velocity, cassette arrangement, access side, sampling schedule, particulate prefilter and spare module plan.

Planning a Ammonia Removal Filter 610 × 305 × 305 mm Chemisorption Module specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami