STjh 1175 x 575 mm aluzinc FFU with a long narrow casing, central wire-guarded intake and two carrying handles

STJH-ALUZINC-COATED-STEEL-FFU-1175X575

Fan Filter Unit 1175 × 575 mm Aluzinc-Coated Steel

A narrow 1175 x 575 mm aluzinc-steel FFU for standard cleanroom ceiling bays and compact cells.

1175 x 575 x 250 mm housing
1170 x 570 x 69 mm filter
0.35-0.50 m/s face-velocity range

Perkenalan produk

This model uses an aluminized-zinc steel cabinet measuring 1175 x 575 x 250 mm around a 1170 x 570 x 69 mm final filter. The narrow rectangular face is the most compact discharge area in its three-size family, making it suitable for standard ceiling bays and localized production cells. A published 0.35-0.50 m/s velocity range and no more than 50 dBA noise provide the operating envelope for balancing.

Fitur utama:

Narrow ceiling footprint

The 575 mm width fits compact bays while the 1175 mm length follows common long-grid geometry.

Aluzinc cabinet construction

Aluminized-zinc steel provides a practical metallic housing for plenum-side cleanroom service.

Defined acoustic limit

The cited sound level of no more than 50 dBA supports selection for occupied production areas.

Parameter teknis

External Dimensions	1175 x 575 x 250 mm
Filter Dimensions	1170 x 570 x 69 mm
Housing Material	Aluminized-zinc steel plate
Face Velocity	0.35-0.50 m/s
Sound Level	No more than 50 dBA
Power Supply	220 V ±10%, 50 Hz
Airflow Direction	Vertical filtered-air supply
Installation	Supported cleanroom ceiling or equipment-roof mounting
Service Configuration	Plenum-side fan and electrical access
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

Suitable for standard cleanroom ceiling bays, compact process tools and localized production cells using a narrow rectangular supply footprint. The velocity should be set only after the filter, ceiling seal and return-air route are installed.

Solutions for Your Application

A wider FFU conflicts with adjacent ceiling services.Use the 575 mm wide housing to preserve space for lighting, sprinklers or access panels along the bay.

Uncontrolled fan output could disturb a sensitive workstation.Balance within the documented 0.35-0.50 m/s face-velocity range and verify room-side uniformity.

Pilihan yang tersedia

Specify the final filter, speed-control arrangement, ceiling seal and aluzinc finish. Confirm compatibility with the 220 V, 50 Hz electrical basis or request a project-specific configuration.

Planning a Fan Filter Unit 1175 × 575 mm Aluzinc-Coated Steel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami