STJH 600 x 600 mm 120 V AC fan filter unit with a compact square housing on a white background

STJH-AC-FAN-FILTER-UNIT-600X600-120V

Fan Filter Unit 600 × 600 mm 120 V AC

A square HEPA supply unit for a small ceiling bay with a dedicated 120 V connection.

Compact square format
120 V, 60 Hz configuration
Three selectable fan speeds

Perkenalan produk

A top-mounted fan draws air through a coarse prefilter before a baffled plenum feeds the final filter below. The approximately 600 mm square casing suits a single equipment cover or an individual ceiling opening. Its nominal size identifies the module family; the approximate casing dimensions below describe the hardware envelope, which still needs inlet and service clearance above it.

Fitur utama:

Local operating choice

A low, medium and high selector provides discrete settings for a stand-alone clean-air supply point.

Serviceable inlet stage

The removable coarse filter can be attended to from above without treating the delicate final-filter surface as a cleaning area.

Coated metal enclosure

Powder-coated steel surrounds an aluminum-framed filter, providing a practical external surface for routine cleaning around the mounting position.

Parameter teknis

Nominal Module Size	600 × 600 mm
Approximate Casing Dimensions	600 × 598 × 320 mm (W × L × H)
Electrical Supply	120 V AC, single phase, 60 Hz
Motor Type	Permanent split capacitor (PSC) AC motor
Speed Selection	Three-position low, medium and high switch
Final Filtration	HEPA, 99.99% efficiency at 0.3 µm
Inlet Prefilter	Replaceable MERV 7 coarse filter
Housing and Filter Frame	Powder-coated steel housing; aluminum filter frame
Filter Replacement Access	Top-side access
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Applications

For a compact inspection cover, a small electronics work enclosure or a local clean-air ceiling point where 120 V service is available. The unit supplies filtered air; it is not a chemical-exhaust or biological-containment device.

Solutions for Your Application

The existing roof opening was selected from a nominal dimension only.Compare the clear opening and support ledge with the approximately 600 × 598 mm casing before choosing the mounting gasket.

A small enclosure receives an unnecessarily forceful supply stream.Choose the appropriate speed setting and assess air movement with the normal workpieces and return openings in place.

Pilihan yang tersedia

Discuss a suitable mounting seal, support hardware and 120 V connection arrangement. An alternative final-filter selection can be assessed for the contamination-control task; no change of filter is assumed in the stated HEPA configuration.

Planning a Fan Filter Unit 600 × 600 mm 120 V AC specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami