Three-quarter view of a motorized volume control damper with airfoil blades

Sistem Distribusi Udara Cleanroom

Kontrol Volume Motorized Damper

An actuator-driven airfoil damper that modulates rectangular duct airflow from an external control signal and closes against perimeter seals.

Direct-Coupled Electric Actuator
Low-Leakage Airfoil Blades
Modulating or On-Off Control
External Position Indication

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The motorized volume control damper uses linked hollow airfoil blades to regulate airflow with less turbulence than formed single-skin blades at high velocity. A direct-coupled electric actuator mounts on the extended drive shaft and moves the opposed blade bank in response to an on-off, floating or proportional signal. Tip and jamb seals reduce closed-position leakage, while enclosed gears or linkage keep the mechanism synchronized. The actuator remains outside the duct for wiring, manual override and position inspection.

Fitur utama:

Extruded or fabricated airfoil blades reduce pressure loss and regenerated sound in modulating service.

A direct-coupled actuator eliminates crank-arm backlash and transmits torque directly to the drive shaft.

Blade-tip and jamb seals improve shut-off during unoccupied, purge or equipment-isolation sequences.

External position indication and optional auxiliary switches provide visible and electrical proof of travel.

Solusi untuk aplikasi Anda

Automatic duct control requires adequate actuator torque, stable blade synchronization and a control signal that matches the desired fail position and modulation sequence.

An undersized actuator stalls before the sealed blades reach full closure.Blade area, differential pressure, seal friction and linkage arrangement are included in the torque selection.

Loose external crank arms introduce deadband around the commanded position.A rigid direct-coupled shaft connection reduces lost motion between the actuator and blade bank.

Uneven linkage travel leaves several blades partly open during shutdown.Geared or positively linked blades maintain synchronized rotation across the complete frame.

A power interruption leaves a critical exhaust branch in the wrong position.A spring-return actuator drives the damper to the selected normally open or normally closed safety position.

Aplikasi yang Tipis

Automatic cleanroom supply controlAir-handler mixing and bypass sectionsLaboratory exhaust modulationOutside-air and return-air sequencingProcess ventilation zone control

Parameter teknis

Representative construction ranges for an airfoil-blade motorized rectangular damper are shown below.

Bahan inti	Extruded aluminum airfoil blades with elastomer tip seals, galvanized frame and steel drive shaft
Ketebalan Panel (Panel Thickness)	20–35 mm hollow airfoil blade depth
Efektif lebar	150–1500 mm nominal single-section airway width
Panjang maksimum	Up to 1800 mm single-section frame height
Baja menghadap ketebalan	1.2–1.5 mm galvanized frame and actuator mounting plate
Kepadatan inti (core density)	Approximately 2700 kg/m³ for the aluminum blade material
Konduktivitas Termal (Thermal Conductivity)	Approximately 160–205 W/(m·K) for the aluminum airfoil sections
Permukaan selesai	Natural aluminum blades with galvanized or powder-coated frame and protected actuator bracket
Jenis Bersama	Flanged frame with geared opposed blades, perimeter seals and direct-coupled external actuator
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

24 V or 230 V actuator supplyOn-off, floating or 0–10 V modulationSpring-return or non-spring-return driveAuxiliary switches and weather-resistant actuator enclosure

Planning a Motorized Volume Control Damper specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami