Garmen Cleanroom, PPE dan Consumables

Microfiber Cleanroom Wipes

Soft split-microfiber cleanroom wipes engineered for efficient particle capture, liquid sorption and low-abrasion cleaning of precision surfaces.

Split microfiber structure improves fine-particle and residue pickup
Dense soft face supports cleaning of delicate controlled surfaces
High sorbency helps meter solution across broader wiping areas

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Microfiber Cleanroom Wipes combine fine polyester and polyamide filaments in a split-fiber structure that increases contact area with the surface. The dense fabric captures fine particles and oily films while distributing cleaning solution more evenly than many conventional nonwoven wipes. A pale-blue color provides practical contrast against light-colored residue without introducing printed markings or loose colored fibers.

Fitur utama:

Split polyester/polyamide microfibers increase effective surface contact

Dense low-lint fabric captures fine debris within the fiber structure

Soft wiping face suits glass, polished metal and sensitive equipment panels

High sorptive capacity supports controlled wet wiping and wiping-to-dry

Ultrasonically cut or sealed edges reduce loose perimeter fibers

Solusi untuk aplikasi Anda

Fine contamination can remain after a visually clean surface has been wiped. Operators also need a fabric that removes films without scratching delicate finishes or releasing excess solvent.

Conventional wipes may push small particles rather than retain them.Use split microfiber to increase particle-capture area and capillary action.

Coarse fabric can mark polished or optical surfaces.Specify a dense soft face with no abrasive mesh or exposed hard component.

Uneven liquid release can leave streaks and wet patches.Match fabric weight and sorbency to the solution volume used in the procedure.

Thick fabric may trap residual chemistry if it is not folded and changed correctly.Provide suitable sheet size and folding guidance so fresh wiping faces are exposed in sequence.

Aplikasi yang Tipis

Suitable for cleaning glass, stainless steel, isolator surfaces, optics, equipment touchpoints and precision components in pharmaceutical, biotechnology, medical-device, display and electronics production.

Parameter teknis

The following ranges cover common cleanroom-compatible split-microfiber wipes. Fabric blend, weight, edge method and laundering level can be selected for the target surface and contamination type.

Bahan inti	Split microfiber blend of polyester and polyamide
Ketebalan Panel (Panel Thickness)	0.45–0.80 mm
Efektif lebar	150–310 mm
Panjang maksimum	310 mm
Baja menghadap ketebalan	0 mm; tidak ada baja menghadap yang digunakan
Kepadatan inti (core density)	130–220 kg/m³ apparent fabric density
Konduktivitas Termal (Thermal Conductivity)	0.04-0.07 W/(m · K), kain tergantung
Permukaan selesai	Pale-blue dense microfiber wiping face
Jenis Bersama	Ultrasonically cut or sealed perimeter edge
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

White or pale-blue fabricPolyester/polyamide blend selected for pickup and sorbency150 mm, 230 mm or 310 mm square sheetsDry or pre-saturated supplySealed-edge configurationDouble-bagged or sterile packaging

Planning a Microfiber Cleanroom Wipes specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami