Complete 316L medical pass box in front-right-top view with dual interlocked glazed doors

Peralatan Cleanroom Spesifik Industri

Kotak Pass Medis

A wall-mounted static 316L stainless transfer chamber with opposing electromagnetic interlocked doors, observation windows and clear door-status indication.

Ruang berlapis 316L
Menentang pintu yang saling berkunci
Dual Observation Windows
Red-Green Door Status

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The medical pass box is a straight-through static transfer chamber for moving packaged supplies and small clinical materials between adjacent controlled rooms without routine personnel passage. Its double-wall 316L stainless shell encloses the interlock components away from the cleanable chamber, while continuously joined internal surfaces and coved corners reduce ledges around the transfer path. Matching hinged doors on both sides use tempered-glass windows, compression gaskets and an electromagnetic interlock so only one side is released at a time. A simple front control switch and red-green indicators give operators an immediate local view of door status without adding an airflow or filtration module.

Fitur utama:

An electromagnetic interlock holds the opposing door closed while one transfer side is open.

The 316L stainless interior uses smooth welded transitions and coved corners for accessible wipe-down cleaning.

Equal glazed windows let staff confirm chamber occupancy before operating either door.

A double-wall shell isolates lock hardware from the unobstructed transfer compartment.

Solusi untuk aplikasi Anda

Medical material transfer must limit unnecessary room entry while keeping the chamber observable, cleanable and unambiguous to operators on both sides.

Opening both sides together can create a direct path between rooms with different pressure or cleanliness conditions.The opposing electromagnetic locks allow one door to be released while retaining the other door closed.

Frequent disinfectant wiping can expose seams, ledges and mild materials to staining or residue accumulation.A 316L stainless chamber with continuous joints and coved internal transitions provides a corrosion-resistant accessible surface.

Staff may operate a hatch without knowing whether material remains inside or the opposite side is active.Matching observation windows and red-green status lamps provide visual confirmation before each transfer step.

Interlock parts projecting into the chamber create hard-to-reach cleaning points.The double-wall enclosure keeps the lock mechanism outside the unobstructed transfer compartment.

Aplikasi yang Tipis

Surgical-suite supply transferHospital pharmacy clean areasClinical laboratory support roomsCentral sterile service interfaces

Parameter teknis

Typical configurable construction values for a wall-mounted static 316L medical pass box are listed below.

Bahan inti	Double-wall AISI 316L stainless steel chamber and doors with tempered-glass windows, silicone gaskets and electromagnetic locks
Ketebalan Panel (Panel Thickness)	50-90 mm double-wall shell and door section
Efektif lebar	450-750 mm clear transfer chamber width
Panjang maksimum	Up to 1000 mm configurable clear chamber depth
Baja menghadap ketebalan	1.0-1.5 mm AISI 316L stainless sheet
Kepadatan inti (core density)	8000 kg/mmaine untuk baja antikarat AISI 316L
Konduktivitas Termal (Thermal Conductivity)	Baja tahan karat pada suhu ruangan, 15 W/(m · K) untuk AISI 316L
Permukaan selesai	Neutral satin brushed 316L stainless steel with smooth welds and coved internal corners
Jenis Bersama	Continuously joined double-wall chamber with gasketed opposing hinged doors and electromagnetic interlock
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Application-selected clear chamber dimensionsSatin disikat atau dipoles 316L internal selesaiFixed and removable wall-flange arrangementsMechanical interlock for non-powered installations

Planning a Medical Pass Box specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami