Peralatan Dekontaminasi Personil dan Bahan

Pembersih Tunggal Perekat Profil Rendah dengan Kabinet Ekstraksi Jarak Jauh

A low SUS304 adhesive-mat tray paired with an independent suction-and-filtration cabinet for dry contamination-control entry areas.

Low-profile SUS304 mat tray
Replaceable adhesive collection media
Separate filtered extraction cabinet
Remote service access

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This two-part entry system keeps the walking surface and extraction service equipment separate. The low-profile SUS304 tray holds replaceable adhesive collection media at the approach point, while an independently located suction-and-filtration cabinet manages extracted dust from the designated collection zone. The layout suits dry controlled entries where the service cabinet should not occupy the personnel walking surface.

Fitur utama:

The low stainless steel tray gives adhesive collection media a defined, stable location.

Replaceable adhesive sheets or film can be changed without moving the extraction cabinet.

The separate cabinet allows filter service away from the entry mat position.

A low threshold profile reduces the step-up at the personnel route.

The mat tray and cabinet can be positioned to suit the available entrance geometry.

Solusi untuk aplikasi Anda

A dry entry may need adhesive collection at floor level while placing suction and filter servicing away from the walking line.

A raised dust-control unit disrupts a narrow personnel route.The SUS304 mat tray uses a low-profile format at the approach point.

Filter servicing beside the entry surface creates congestion.The suction-and-filtration cabinet is independent from the adhesive mat tray.

Adhesive media must be renewed without dismantling the complete entry system.The mat tray accepts replaceable adhesive media as a separate service item.

Dry areas cannot use a wet footwear-cleaning process.The system relies on dry adhesive collection and a separate extraction arrangement.

Aplikasi yang Tipis

Electronics cleanroom approachesDry pharmaceutical support entriesPrecision optics changing areasBattery dry-room access zonesLaboratory personnel routes

Parameter teknis

The tray footprint, adhesive-media format and remote cabinet placement can be selected around the dry entry layout.

Bahan inti	SUS304 adhesive mat tray with separate SUS304 filtered extraction cabinet
Ketebalan Panel (Panel Thickness)	1.0–1.5 mm stainless steel tray and cabinet panels
Efektif lebar	450–800 mm active adhesive mat width
Panjang maksimum	600–1200 mm low-profile mat length
Baja menghadap ketebalan	1.0–1.5 mm SUS304
Kepadatan inti (core density)	900–950 kg/m³ for adhesive-film polymer backing
Konduktivitas Termal (Thermal Conductivity)	0.35–0.45 W/(m·K) for adhesive-film polymer backing
Permukaan selesai	Brushed SUS304 tray and cabinet with replaceable adhesive collection media
Jenis Bersama	Removable adhesive-media tray with independently ducted filter cabinet
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Adhesive sheet or film formatSingle or dual mat-tray layoutExtraction cabinet positionPre-filter and final-filter service stages

Planning a Low-Profile Adhesive Sole Cleaner with Remote Extraction Cabinet specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami