Enclosed laminar flow transfer cart with top fan filter and sealed doors

Aliran Laminar dan Peralatan Penahanan

Gerobak Transfer Aliran Laminar

An enclosed wheeled cart that maintains downward HEPA-filtered airflow around clean parts while they move between controlled areas.

Filtered Air During Transfer
Perforated Adjustable Shelves
Gasketed Access Doors
Battery Power Option

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The transfer cart encloses materials within a positive filtered-air cabinet mounted on heavy-duty cleanroom casters. A top fan-filter unit supplies downward air through perforated adjustable shelves and exhausts at the lower cabinet level. Gasketed doors reduce room-air entry during movement, while an optional battery or UPS maintains the blower when the cart is disconnected from wall power. The cart protects clean contents; it is not a containment carrier for hazardous materials.

Fitur utama:

Perforated shelves allow filtered air to reach every storage level.

Top-down airflow directs particles toward low exhaust openings rather than across stored parts.

Gasketed doors and compression latches limit unfiltered air entry during transit.

Large non-shedding casters and ergonomic handles support controlled corridor movement.

A battery-status alarm can warn before the fan supply is interrupted.

Solusi untuk aplikasi Anda

Clean materials are vulnerable when they leave one controlled room and pass through a less-controlled corridor or staging area.

Open carts expose parts to corridor particles.A sealed cabinet surrounds the load with downward HEPA-filtered air.

Solid shelves block airflow to lower levels.Perforated adjustable shelves preserve the vertical clean-air path.

The fan stops as soon as wall power is unplugged.An optional onboard battery or UPS supports the transfer interval.

Door gaps admit unfiltered air during movement.Continuous gaskets and compression latches secure each access door.

Aplikasi yang Tipis

Transfer Komponen SterilClean tool movementSemiconductor cassette transportMedical-device subassembly transfer

Parameter teknis

Typical configurable construction ranges for a laminar flow transfer cart are listed below.

Bahan inti	SUS304 cabinet and perforated shelves with a powder-coated steel or stainless fan-filter housing
Ketebalan Panel (Panel Thickness)	25-40 mm double-skin door and roof sections
Efektif lebar	600-1200 mm usable cabinet width
Panjang maksimum	Up to 2200 mm overall cart height
Baja menghadap ketebalan	1.0-1.5 mm SUS304 cabinet skins and shelves
Kepadatan inti (core density)	Approximately 7900 kg/m³ for stainless steel structural components
Konduktivitas Termal (Thermal Conductivity)	14 - 16 W / (m · K) untuk baja tahan karat SUS304
Permukaan selesai	Brushed SUS304 with smooth door liners and cleanroom-compatible caster hardware
Jenis Bersama	Welded cabinet seams with gasketed compression-latched doors and bolted perforated shelf rails
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Single or double-sided doorsBattery and charger moduleTwo to ten storage compartmentsElectropolished stainless construction

Merencanakan spesifikasi Laminar Flow Transfer Cart?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami