Double-wall stainless steel high-temperature exhaust duct section

Sistem Distribusi Udara Cleanroom

Saluran knalpot Double-Wall Suhu Tinggi

A modular double-wall exhaust system with a 316L stainless inner liner, mineral-fiber insulation and stainless outer casing for hot dry process air.

316L Stainless Inner Liner
Integrated Mineral-Fiber Insulation
Double-Wall Modular Body
Up to 600°C Dry Service

Permintaan untuk kutipan Browse Produk

Perkenalan produk

High-temperature double-wall exhaust duct contains hot dry process gases within a welded stainless inner liner while mineral-fiber insulation reduces heat transfer to the external casing. Straight cylindrical modules connect with precision male-female ends, high-temperature seals where appropriate and external locking bands. The inner column can expand relative to the outer shell, limiting thermal stress through long routes. The system is suited to ovens, sterilizers, generators and selected industrial exhaust sources where conventional HVAC sheet duct and insulation are inadequate.

Fitur utama:

A 316L stainless inner liner provides a continuous high-temperature gas path with good corrosion resistance.

Mineral-fiber insulation lowers outer-wall temperature and limits heat loss from the conveyed exhaust.

Modular locking-band joints allow sections, bends and access components to be assembled without broad field welds.

Independent inner-wall movement accommodates thermal expansion along extended exhaust routes.

Solusi untuk aplikasi Anda

A hot exhaust route must contain temperature and pressure while allowing thermal growth and keeping adjacent surfaces within a manageable heat exposure.

Single-wall duct radiates excessive heat into the mechanical space.A mineral-fiber layer separates the hot inner liner from the stainless outer casing.

Rigid joints crack when a long duct line expands during heat-up.The modular inner column is detailed to expand without forcing the outer support shell.

Ordinary elastomer gaskets degrade at process exhaust temperature.Metallic or selected high-temperature joint seals match the actual dry-service temperature.

Thin carbon-steel duct oxidizes rapidly in hot humid exhaust.A welded 316L inner gas path resists heat and a broader range of condensate exposures.

Aplikasi yang Tipis

Industrial oven exhaustSterilizer hot-air dischargeGenerator and engine exhaustHigh-temperature process ventilationCommercial kitchen exhaust risers

Parameter teknis

Representative construction ranges for modular high-temperature double-wall exhaust duct are shown below.

Bahan inti	High-temperature mineral-fiber insulation between stainless steel walls
Ketebalan Panel (Panel Thickness)	25–50 mm insulation thickness
Efektif lebar	100–1200 mm nominal internal diameter
Panjang maksimum	1000 mm per standard modular straight section
Baja menghadap ketebalan	0.6–1.0 mm 316L inner liner and 0.5–0.7 mm 304 outer casing
Kepadatan inti (core density)	100–180 kg/m³ high-temperature mineral fiber
Konduktivitas Termal (Thermal Conductivity)	0.040–0.060 W/(m·K), depending on insulation and mean temperature
Permukaan selesai	Bright or brushed stainless inner liner with stainless outer casing
Jenis Bersama	Male-female modular socket with temperature-rated seal and external locking band
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

25 mm or 50 mm mineral insulation304 or 316L outer casingPressure-tight sealing systemElbows, tees, drains and inspection modules

Planning a High-Temperature Double-Wall Exhaust Duct specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami