Three-quarter view of a reinforced high-airflow medium-efficiency filter

Filter udara dan filtrasi kimia

Filter Efisiensi Menengah Aliran Udara Tinggi

A reinforced extended-surface filter built to process higher air volumes while maintaining open channels through a deep supported media pack.

High Face Velocity
Reinforced Metal Cell
Open Deep-Pleat Channels
Large Dust Storage

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The high-airflow medium-efficiency filter combines a deep extended-surface media pack with rigid galvanized or aluminized-steel cell sides, protective faceguards and structural support straps. Corrugated separators or stabilized pleat spacers maintain open channels through the full depth of the pack as face velocity rises. A high-loft microglass or synthetic medium stores particles through its depth, while the rigid header resists the pulsation and turbulence found in large air handlers and process-air inlets. This construction emphasizes mechanical stability and airflow capacity rather than minimum cabinet depth.

Fitur utama:

A deep pack exposes enough media area for elevated airflow without excessive local media velocity.

Corrugated separators preserve full-length channels under turbulent inlet conditions.

Metal faceguards and cross straps protect the pack from bowing and handling damage.

A high-strength enclosing cell keeps the gasket plane flat under sustained differential pressure.

Solusi untuk aplikasi Anda

High-volume systems expose filter packs to turbulence, pulsation and structural loads that ordinary medium filters may not withstand.

Increasing airflow sharply raises pressure drop through a small media pack.A full-depth extended-surface pack lowers velocity at the media and preserves open flow channels.

Turbulent inlet air bows the pleats and damages the pack perimeter.Corrugated separators, faceguards and support straps share the load across the rigid cell.

Repeated fan starts loosen the internal pack-to-frame bond.Deep polyurethane potting anchors the entire media perimeter inside the metal cell.

A distorted header leaves compression gaps along the filter bank.Reinforced galvanized cell sides maintain a flat gasket surface at high operating pressure.

Aplikasi yang Tipis

Large central air-handling unitsCleanroom make-up-air plantsProcess ventilation systemsIndustrial supply-air filtrationHigh-volume turbine and compressor intake prefiltration

Parameter teknis

Typical construction ranges for a reinforced high-airflow medium-efficiency filter are listed below.

Bahan inti	High-loft microglass or synthetic media with corrugated aluminum or hot-melt separators
Ketebalan Panel (Panel Thickness)	292 mm nominal extended-surface depth
Efektif lebar	Lebar wajah modular 305-610mm
Panjang maksimum	Up to 610 mm standard face length
Baja menghadap ketebalan	0.80-1.20 mm galvanized or aluminized-steel cell sides and faceguards
Kepadatan inti (core density)	Approximately 80-135 kg/m³ nominal supported media-pack density
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.034-0.043 W/(m·K) for the dry filter medium
Permukaan selesai	Mill-galvanized or aluminized-steel cell with white media and metallic faceguards
Jenis Bersama	Deep pleated pack potted into a reinforced rigid cell with single or double header
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

MERV 11 or MERV 14 mediaStandard- or high-capacity pleat packSingle-header or double-header cellUpstream prefilter clips and heavy-duty faceguards

Planning a High-Airflow Medium-Efficiency Filter specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami