Explosion-proof cleanroom socket with interlocked rotary switch on stainless plate

Cleanroom Lighting dan Peralatan Listrik

Socket Cleanroom Bukti Ledakan

A hazardous-area socket assembly that interlocks power switching with plug insertion and mounts through a cleanable stainless wall panel.

Mechanical Switch Interlock
Robust Alloy Receptacle
Color-Coded Pin Arrangement
Flush Stainless Mounting Panel

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This socket combines a flame- and dust-protected pin-and-sleeve receptacle with a rotary isolating switch. The mechanical sequence prevents the plug from being withdrawn while contacts remain energized. For controlled environments, the assembly is mounted through a brushed 316L panel that covers the wall opening and positions the heavier alloy device behind a smooth hygienic flange.

Fitur utama:

The switch cannot close until the plug is correctly engaged.

The plug remains mechanically retained until the isolator returns to off.

Color and keying prevent connection of incompatible voltage configurations.

A hinged protective cap closes the receptacle when unused.

The stainless mounting panel separates the rugged device body from the room wall joint.

Solusi untuk aplikasi Anda

Portable power in a hazardous cleanroom must control arcing at the contacts while keeping a complex industrial receptacle cleanable.

A plug can arc if it is removed under electrical load.The rotary interlock opens the circuit before mechanical release of the plug.

Different-voltage plugs look similar during fast maintenance work.Physical keying and color coding block mismatched connections.

The heavy cast body leaves a rough opening in a sandwich wall.A rigid stainless sanitary panel spans and seals the complete cutout.

Dust or wash liquid enters an unused receptacle.A retained gasketed cap closes the device between connections.

Aplikasi yang Tipis

Solvent-process cleanroomsHazardous maintenance outletsBattery production areasFine-chemical controlled rooms

Parameter teknis

Typical configurable construction ranges for an explosion-proof cleanroom socket are listed below.

Bahan inti	Copper-free aluminum or cast-iron interlocked receptacle with brass contacts and SUS316L hygienic mounting plate
Ketebalan Panel (Panel Thickness)	2.0-4.0 mm stainless sanitary mounting plate
Efektif lebar	220-450 mm complete interlocked assembly width
Panjang maksimum	Up to 650 mm overall panel height
Baja menghadap ketebalan	2.0-3.0 mm SUS316L cleanroom-facing plate
Kepadatan inti (core density)	Approximately 2700 kg/m³ for copper-free aluminum receptacle housing
Konduktivitas Termal (Thermal Conductivity)	150-200 W/(m·K) for the aluminum housing
Permukaan selesai	Natural or coated light-grey alloy device on a fine-brushed stainless hygienic plate
Jenis Bersama	Interlocked pin-and-sleeve coupling with gasketed cap, threaded hubs and concealed plate perimeter seal
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

16-63 A current configurationsDifferent pole and voltage keyingSingle or dual socket panelBottom or rear cable entry

Planning a Explosion-Proof Cleanroom Socket specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami