Bahasa Inggris
Bahasa Portugis
Bahasa Spanyol
Bahasa Melayu
Bahasa IndonesiaSaat ini
Bahasa Jerman
Bahasa Turki
Bahasa Vietnam
Bahasa Perancis: Bahasa Perancis
Bahasa Rusia
Bahasa Arab
Bahasa Thailand
Bahasa Jepang
Bahasa Korea
Produk ESD dan Antistatik
Tas Kemasan ESD
The ESD Packaging Bag is a transparent pink low-charging polyethylene pouch for organizing non-shielding component packages inside controlled ESD work areas.
- Low-charging polyethylene reduces triboelectric charge generation during routine handling.
- Transparent pink film allows labels and components to remain visible.
- Resealable zipper supports repeated transfers within an ESD protected area.
Perkenalan produk
The pouch is formed from light-pink low-density polyethylene with an antistatic formulation and a smooth interior surface. It is intended for routine organization, kitting and short-term movement within a protected environment where discharge shielding is not required. Heat-welded side seams and an integral zipper provide a lightweight reusable closure. The film remains transparent enough for barcode, label and content inspection.
Fitur utama:
Light-pink identification distinguishes the bag from ordinary clear packaging.
Transparent film keeps component labels visible.
Integral zipper enables repeated opening without a separate fastener.
Flexible film conforms around small parts and kits.
Wide welded edges reduce seam splitting during normal handling.
Multiple bag sizes support organized line-side inventory.
Solusi untuk aplikasi Anda
A low-charging bag is useful only when its intended limits, storage life and closure method are understood by the process owner.
Ordinary polyethylene can charge strongly during handling.The low-charging formulation reduces triboelectric generation under normal use.
Operators confuse low-charging bags with shielding packaging.The pink color and process labeling distinguish EPA-use packaging from silver shielding bags.
Contents must be checked without opening every pouch.Transparent film preserves visual and barcode identification.
Repeated tape closure contaminates the package edge.The integrated zipper provides a clean reusable closure.
Antistatic performance can decline with age or unsuitable storage.Date-controlled inventory and periodic verification support timely replacement.
Aplikasi yang Tipis
Component kitting within an EPA.Line-side organization of non-exposed parts.Short-term storage of fixtures and consumables.Assembly work-in-process identification.Packaging of non-sensitive items entering an ESD area.Internal handling where electrostatic shielding is not required.
Parameter teknis
The representative product is a 4 mil pink low-charging polyethylene zipper bag. This type is intended primarily for controlled use inside an EPA and is not represented as a substitute for a shielding bag where discharge shielding is required.
| Bahan inti | Low-density polyethylene with a low-charging antistatic formulation |
|---|---|
| Ketebalan Panel (Panel Thickness) | 0.076-0.102 mm representative film thickness |
| Efektif lebar | 50-600 mm available internal bag width |
| Panjang maksimum | Up to 900 mm finished bag length |
| Baja menghadap ketebalan | Not applicable; 0 mm steel facing |
| Kepadatan inti (core density) | 910-940 kg/m³ representative low-density polyethylene range |
| Konduktivitas Termal (Thermal Conductivity) | 0.30-0.45 W/(m·K) representative polyethylene film range |
| Permukaan selesai | Smooth transparent light-pink low-charging film with optional ESD marking |
| Jenis Bersama | Heat-welded side and bottom seams with integral press-to-close zipper |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Zipper-top or open heat-seal format.Printed or unprinted pink film.Standard and custom bag sizes.3 mil, 4 mil or heavier film.Permanent dissipative clear barrier alternative.Custom label panel and traceability marking.Shielding-bag upgrade for transport outside the EPA.
Planning a ESD Packaging Bag specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
