Complete cleanroom aluminum U-channel edge trim

Sistem Dinding dan Langit-langit Cleanroom

Cleanroom U-Channel Edge Trim

An extruded aluminum U-channel used to close exposed cleanroom panel ends, retain wall or ceiling modules and form straight, sealable junctions around openings and perimeter edges.

6063-T5 Aluminum
Panel Edge Protection
Straight Sealed Termination
50–100 mm Panel Fit

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Cleanroom U-Channel Edge Trim is a rigid 6063-T5 aluminum extrusion sized to cap the end of a modular wall or ceiling panel. It protects exposed panel skins and core material, keeps the termination straight and supplies a controlled line for hygienic sealant. Common internal widths match 50, 75 and 100 mm panel systems, while anodized or white powder-coated finishes coordinate with the cleanroom envelope. The profile is useful at wall ends, ceiling perimeters, framed openings and selected T-junctions where a simple, durable closure is preferred to a multi-part trim.

Fitur utama:

The U-shaped section captures both panel faces and shields the core from direct contact.

6063-T5 aluminum combines dimensional accuracy with practical corrosion resistance indoors.

A straight extrusion creates a consistent perimeter line for silicone or gasket sealing.

Standard channel widths match widely used 50, 75 and 100 mm modular panel systems.

Anodized and powder-coated finishes avoid an unfinished metallic edge in the clean area.

Solusi untuk aplikasi Anda

Edge closures must protect the panel core, remain straight over long runs and leave a surface that can be sealed and wiped without exposed fasteners.

An exposed sandwich-panel core can shed particles or absorb cleaning moisture.The full-depth channel encloses both skins and the open core edge behind a sealed aluminum face.

A loose termination lets the panel end move and crack the sealant line.A correctly sized internal channel width grips the panel and distributes restraint along the edge.

Uneven cut edges remain visible beside doors, windows or equipment openings.The straight extrusion masks minor edge variation and establishes a uniform finished reveal.

Bare or rough metal edges are difficult to clean safely.Smooth anodized or powder-coated aluminum presents a closed, wipeable perimeter surface.

Aplikasi yang Tipis

Cleanroom wall end closuresCeiling perimeter terminationsPanel-to-opening edge trimsT-junction panel restraintsService aperture perimeter finishing

Parameter teknis

The following ranges represent common extruded U-channel edge trims for modular cleanroom panel systems.

Bahan inti	Solid 6063-T5 extruded aluminum; no cellular core
Ketebalan Panel (Panel Thickness)	1.0–1.5 mm profile wall thickness
Efektif lebar	50, 75 or 100 mm internal channel width
Panjang maksimum	6000 mm ZXQ000003
Baja menghadap ketebalan	N/A — aluminum edge trim has no steel facing
Kepadatan inti (core density)	N/A — solid aluminum extrusion
Konduktivitas Termal (Thermal Conductivity)	N/a-tidak ditentukan sebagai panel isolasi
Permukaan selesai	Clear anodized or polyester powder-coated aluminum
Jenis Bersama	Slip-fit U-channel with adhesive, concealed fasteners and perimeter sealant
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

50, 75 and 100 mm internal widthsWhite powder-coated finishClear anodized finishPre-cut lengths and corner mitres

Planning a Cleanroom U-Channel Edge Trim specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami