Electric drop bolt lock with stainless keeper for a cleanroom door

Pintu Cleanroom, Jendela dan Sistem Interlock

Cleanroom Listrik Drop Bolt Lock

A concealed solenoid-operated bolt that projects into a matching keeper after the cleanroom door reaches its aligned closed position.

Concealed Mortise Body
Hardened Stainless Bolt
Door Alignment Tolerance
Bolt Status Feedback

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This electric drop bolt is recessed into the cleanroom header, frame or door leaf so only narrow stainless faceplates remain visible. A position input prevents premature projection, then the solenoid drives a hardened bolt into the keeper to secure the closed opening. Monitored versions can report both door alignment and bolt position, making the lock suitable for automated access sequences where a compact hidden mechanism is preferred.

Fitur utama:

A stainless bolt and reinforced keeper provide positive mechanical engagement after the door closes.

The narrow mortise body fits aluminum cleanroom frames without a bulky external lock case.

Door-position and bolt-position contacts support separate closed and locked indications.

A controlled re-lock delay can accommodate door rebound before the bolt projects.

Solusi untuk aplikasi Anda

A concealed bolt must tolerate normal door movement while avoiding projection against a misaligned keeper.

A bolt that fires before the leaf settles can strike the keeper edge and jam.The lock uses door-position input and an adjustable delay before extension.

External lock cases disrupt the clean lines of a narrow aluminum frame.The solenoid body is mortised behind a slim stainless faceplate.

Maintenance staff need to know whether the bolt actually reached the locked position.A dedicated bolt monitor reports full extension independently of the door contact.

Aplikasi yang Tipis

Interlocked swing doorsAutomatic sliding cleanroom doorsRestricted laboratory roomsHigh-value controlled storage

Parameter teknis

Common dimensions and materials for a compact cleanroom electric drop bolt are shown below.

Bahan inti	Copper solenoid coil, low-carbon steel plunger and hardened stainless-steel bolt
Ketebalan Panel (Panel Thickness)	Approximately 43–46 mm mortise-body depth
Efektif lebar	Approximately 34–38 mm faceplate width
Panjang maksimum	Approximately 210 mm overall faceplate length
Baja menghadap ketebalan	2.5–3.0 mm brushed stainless-steel faceplate
Kepadatan inti (core density)	Approximately 7850 kg/m³ for the steel bolt and magnetic plunger
Konduktivitas Termal (Thermal Conductivity)	Approximately 15–50 W/(m·K) across stainless and low-carbon steel components
Permukaan selesai	Brushed stainless-steel lock and keeper faceplates
Jenis Bersama	Flush mortise installation with aligned bolt keeper and concealed cable entry
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Fail-safe or fail-secure operation12 or 24 VDC inputBolt and door-position monitoringNarrow-frame and glass-door brackets

Planning a Cleanroom Electric Drop Bolt Lock specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami