Cleanroom data outlet panel with stainless face and colored sealed network ports

Cleanroom Lighting dan Peralatan Listrik

Panel Outlet Data Cleanroom

A flush stainless network plate that organizes sealed copper and fiber connections at the cleanroom wall while protecting unused ports.

Sealed RJ45 and Fiber Modules
Flush Stainless Faceplate
Retained Dust Caps
Permanent Port Identification

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The data outlet panel groups industrial RJ45, fiber, USB or other low-voltage interfaces on one cleanroom plate. Each bulkhead adapter seals to the panel and connects to fixed cabling in the rear box, avoiding loose patch leads through an open wall penetration. Retained caps close unused ports, and engraved labels map each connector to the network or equipment endpoint.

Fitur utama:

Bulkhead adapters isolate room patch leads from permanent in-wall cable.

Retained caps protect unused connector faces during cleaning.

Engraved port numbers remain legible after repeated disinfectant wiping.

The stainless plate closes the wall opening with one concealed gasket.

Rear cable management preserves bend radius and strain relief for copper and fiber.

Solusi untuk aplikasi Anda

Data access must remain flexible without leaving open ports, unlabeled cables or an unsealed path into the wall cavity.

Loose network cables pass directly through a drilled wall hole.Bulkhead couplers terminate permanent cabling at a sealed plate.

Unused RJ45 and fiber ports fill with dust or cleaning mist.Tethered caps close each unoccupied connector.

Patch leads are connected to the wrong network segment.Permanent port numbers and color coding identify each service.

Tight rear bends damage fiber at a shallow back box.A deeper cable-management zone controls bend radius and strain relief.

Aplikasi yang Tipis

Cleanroom equipment networkingLaboratory data connectionsMonitoring system portsTemporary validation instruments

Parameter teknis

Typical configurable construction ranges for a cleanroom data outlet panel are listed below.

Bahan inti	SUS304/SUS316L faceplate with industrial RJ45, fiber or USB bulkhead adapters and enclosed rear cable box
Ketebalan Panel (Panel Thickness)	1.5-3.0 mm stainless faceplate thickness
Efektif lebar	120-400 mm data panel width
Panjang maksimum	Up to 500 mm overall panel height
Baja menghadap ketebalan	1.5-3.0 mm cleanroom-facing stainless plate
Kepadatan inti (core density)	Approximately 7900-8000 kg/m³ for the stainless plate material
Konduktivitas Termal (Thermal Conductivity)	14 - 16 W / (m · K) untuk faceplate stainless
Permukaan selesai	Fine-brushed stainless with black or blue connector modules, colored port IDs and tethered caps
Jenis Bersama	Flush gasketed plate with individually sealed bulkhead adapters and strain-relieved rear cable enclosure
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Copper RJ45, fiber, USB or mixed interfacesSingle or multi-port layoutTethered sealing capsColor and laser port identification

Planning a Cleanroom Data Outlet Panel specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami