Bahasa Inggris
Bahasa Portugis
Bahasa Spanyol
Bahasa Melayu
Bahasa IndonesiaSaat ini
Bahasa Jerman
Bahasa Turki
Bahasa Vietnam
Bahasa Perancis: Bahasa Perancis
Bahasa Rusia
Bahasa Arab
Bahasa Thailand
Bahasa Jepang
Bahasa Korea
Aksesoris Instalasi Cleanroom
Suspension Bracket Ceiling Suspension Bracket
A galvanized angle-and-clevis fitting that anchors threaded suspension hardware and provides a pinned interface to cleanroom ceiling framing.
- Rigid Angle Plate
- Threaded-Rod Aperture
- Twin Clevis Ears
- Galvanized Finish
Perkenalan produk
The ceiling suspension bracket is a welded steel fitting combining perpendicular mounting plates with a twin-ear clevis. Its larger aperture accepts compatible rod or anchor hardware, while countersunk fixing holes secure the plate to a structural or grid member. The aligned clevis holes accept a removable pin, creating a compact mechanical transition between hanger hardware and the suspended ceiling frame.
Fitur utama:
A dedicated large aperture accommodates the specified threaded-rod fitting.
Twin clevis ears provide a balanced pinned connection.
Galvanized steel supports concealed interior corrosion protection.
Solusi untuk aplikasi Anda
A suspended grid needs a compact fitting that controls load direction while allowing a serviceable connection between anchor and frame.
Improvised flat plates twist under eccentric hanger loads.The welded angle geometry provides two perpendicular load-bearing planes.
Single-tab connections impose uneven force on the pin.Two aligned clevis ears support the mating fitting on both sides.
Inaccurate holes make field assembly difficult.Defined rod, fixing and pin-hole patterns are matched to the selected hardware.
Bare steel hardware can corrode above a humid ceiling.Galvanized or stainless construction is selected for the plenum environment.
Aplikasi yang Tipis
Cleanroom ceiling suspension pointsCeiling grid-to-rod transitionsUtility support channelsModular enclosure roofsWalkable ceiling framing
Parameter teknis
Typical construction ranges for a galvanized cleanroom ceiling suspension bracket are listed below.
| Bahan inti | Welded galvanized carbon-steel angle plate with twin clevis ears |
|---|---|
| Ketebalan Panel (Panel Thickness) | 40-150 mm compatible cleanroom ceiling-panel thickness |
| Efektif lebar | 40-160 mm mounting plate width |
| Panjang maksimum | Up to 300 mm overall bracket length |
| Baja menghadap ketebalan | 3.00-8.00 mm bracket plate thickness |
| Kepadatan inti (core density) | Approximately 7850 kg/m³ for carbon steel |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 45-60 W/(m·K) for carbon steel |
| Permukaan selesai | Silver zinc-plated or hot-dip galvanized steel |
| Jenis Bersama | Bolted angle mounting with threaded-rod aperture and pinned twin-clevis connection |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Galvanized or 304 stainless steelRound or slotted rod apertureCustom fixing-hole patternClevis pin and retaining clip
Planning a Ceiling Suspension Bracket specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
