Bahasa Inggris
Bahasa Portugis
Bahasa Spanyol
Bahasa Melayu
Bahasa IndonesiaSaat ini
Bahasa Jerman
Bahasa Turki
Bahasa Vietnam
Bahasa Perancis: Bahasa Perancis
Bahasa Rusia
Bahasa Arab
Bahasa Thailand
Bahasa Jepang
Bahasa Korea
Kontrol Cleanroom dan Sistem Pemantauan Lingkungan
Sensor karbon dioksida (CO2)
A wall-mounted NDIR sensor that measures carbon dioxide concentration for occupancy-related ventilation and cleanroom environmental trending.
- NDIR CO₂ Measurement
- Long-Term Optical Stability
- Ventilation Demand Signal
- Selectable 0-10 V, 4-20 mA or Fieldbus Output
Perkenalan produk
The carbon dioxide sensor uses non-dispersive infrared absorption to measure CO₂ without consuming a reactive sensing material. Room air diffuses through protected openings into the optical chamber, where wavelength-selective measurement separates carbon dioxide absorption from the reference signal. Temperature compensation and baseline-management options support stable indoor operation. Selectable voltage, current or network outputs let ventilation controls, environmental monitoring and room displays use the same measured concentration.
Fitur utama:
A dual-channel or reference-compensated design reduces long-term light-source drift.
Ventilated wall housing samples occupied-zone air while protecting the optical chamber.
Configurable analog and network outputs support both HVAC control and monitoring.
Solusi untuk aplikasi Anda
CO₂ measurements are most useful when the sensor sees representative room air and its baseline behavior matches the occupancy pattern.
A sensor near a door or supply diffuser responds to transient air instead of the occupied zone.A stable wall location away from direct drafts provides a more representative room sample.
Automatic baseline correction is unsuitable for continuously occupied spaces.Selectable baseline strategy allows fixed or manually referenced calibration where CO₂ never falls to outdoor levels.
Dust or cleaning spray enters the optical path.Protected diffusion vents and an easy-wipe enclosure reduce direct contamination.
Ventilation controls and monitoring use separate sensors that disagree.Multiple outputs distribute one measured value to both systems.
Aplikasi yang Tipis
Occupied cleanroom ventilationLaboratory room monitoringControlled production suitesClean corridors and support areas
Parameter teknis
Typical materials and dimensions for a wall-mounted NDIR carbon dioxide sensor are listed below.
| Bahan inti | NDIR optical chamber with infrared source and detector in flame-retardant polycarbonate housing |
|---|---|
| Ketebalan Panel (Panel Thickness) | 30-50 mm sensor depth |
| Efektif lebar | 90-130 mm housing width |
| Panjang maksimum | Up to 150 mm housing height |
| Baja menghadap ketebalan | 0 mm; non-metallic wall enclosure |
| Kepadatan inti (core density) | 1180-1220 kg/mstatin untuk bahan perumahan polikarbonat |
| Konduktivitas Termal (Thermal Conductivity) | 0.19-0.22 W/(m · K) untuk kandang polikarbonat |
| Permukaan selesai | Smooth white housing with black display window and green status indicator |
| Jenis Bersama | Rear wall-mount base with protected diffusion vents and pluggable signal terminal |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Display or blank faceTegangan atau 4-20 mA outputKomunikasi Modbus atau BACnetSelectable baseline correction
Planning a Carbon Dioxide Sensor specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
