Automatic boot washing and disinfection station with rotating brushes

Peralatan Dekontaminasi Personil dan Bahan

Stasiun Pencucian dan Desinfeksi Boot Otomatis

A walk-through footwear station that brush-washes boot soles and sides, with configurable application of a compatible hygiene solution.

Rotating sole and side brushes
Configurable solution stage
Guided walk-through lane
Drainable stainless steel basin

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Automatic Boot Washing and Disinfection Station first uses rotating brushes to remove visible soil from the sole and lower boot surfaces. A separate metered stage can apply a facility-selected compatible hygiene solution by spray or controlled shallow contact, according to the operating procedure. Brush modules, a debris screen and the stainless basin remain accessible for routine cleaning and solution replacement; the final solution choice and use conditions are configured for the intended environment.

Fitur utama:

Rotating sole brushes and side brushes provide mechanical washing of boot contact areas.

A configurable spray or shallow-contact stage can apply a compatible hygiene solution.

Metered feed can be linked to the occupied walk-through cycle.

A removable debris screen protects the liquid zone from larger material.

The drainable stainless basin and brush cassettes support routine wash-down access.

Solusi untuk aplikasi Anda

Boot hygiene may require both mechanical soil removal and a defined solution-application step, with the details set by the facility's own procedure.

A solution-only mat is quickly fouled by visible soil on boots.Rotating brushes remove loose residue before the configured solution stage.

Manual application varies in coverage and replenishment practice.A metered spray or shallow-contact module can be set up for the selected operating procedure.

Debris enters the liquid zone and obstructs service components.A removable debris screen captures larger material before routine cleaning.

Deep liquid coverage is unsuitable for some footwear and entry routes.The unit can use targeted spray or a shallow contact zone limited to the required boot area.

Aplikasi yang Tipis

Food and beverage production entriesAnimal-health facility hygiene routesPharmaceutical utility areasControlled agricultural processingWet hygiene airlocks

Parameter teknis

Brush layout, liquid-contact method and solution-management hardware are configured for the footwear, process and site procedure.

Bahan inti	Polypropylene brush cores and chemical-resistant fluid components in a welded SUS304 frame
Ketebalan Panel (Panel Thickness)	Panel bodi baja tahan karat 1.5-2.0mm
Efektif lebar	450–700 mm clear passage
Panjang maksimum	1000–2200 mm washing and solution lane length
Baja menghadap ketebalan	1.5-2.0mm SUS304
Kepadatan inti (core density)	900-1100 kg/mmaine untuk inti sikat Polipropilena
Konduktivitas Termal (Thermal Conductivity)	0.10-0.22 W/(m · K) untuk komponen sikat polimer
Permukaan selesai	Brushed SUS304 with chemical-resistant seals and non-slip grating
Jenis Bersama	Welded drainable basin with removable brush modules and solution manifold
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Brush-only wash or combined wash-and-solution stagesSpray or shallow-contact solution methodSolution feed monitoring interfaceInterlocked exit-gate signal

Planning a Automatic Boot Washing and Disinfection Station specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami