Bahasa Inggris
Bahasa Portugis
Bahasa Spanyol
Bahasa Melayu
Bahasa IndonesiaSaat ini
Bahasa Jerman
Bahasa Turki
Bahasa Vietnam
Bahasa Perancis: Bahasa Perancis
Bahasa Rusia
Bahasa Arab
Bahasa Thailand
Bahasa Jepang
Bahasa Korea
Kontrol Cleanroom dan Sistem Pemantauan Lingkungan
Airflow Sensor Airflow Sensor Airflow Sensor
A multi-point averaging sensor that samples total and static pressure across a duct and produces a stable differential signal for air-volume calculation.
- Multi-Point Duct Averaging
- Total and Static Pressure
- Low Permanent Pressure Loss
- External Tubing Ports
Perkenalan produk
The duct airflow sensor uses perforated aluminum or stainless sensing tubes positioned across the duct cross-section. Upstream ports collect total pressure and separate ports collect static pressure; each set is internally averaged before reaching the external connectors. The resulting differential pressure represents mean duct velocity more reliably than a single-point pickup. Connected to a differential transmitter or controller, the sensor supports continuous volume-flow indication, alarm or closed-loop regulation without an active electronic element in the duct.
Fitur utama:
Separate total and static chambers provide a continuous differential pressure signal.
Passive probe construction needs no power or electronics inside the airstream.
External barbed or compression fittings simplify connection to a remote transmitter.
Solusi untuk aplikasi Anda
Single-point velocity readings often misrepresent total duct airflow when profiles are uneven after elbows, dampers or transitions.
A central pitot point misses high and low velocity regions across the duct.Distributed ports average the profile across multiple locations.
Electronics in the duct are difficult to service and expose wiring to airflow.The passive sensing grid sends only pneumatic signals to an external transmitter.
Tubing connections are inaccessible after ceiling closure.External manifolds place total and static fittings at a serviceable duct location.
Incorrect duct dimensions produce an inaccurate volume-flow value.The controller uses the actual duct area and measured differential to calculate airflow.
Aplikasi yang Tipis
AHU supply airflow measurementCleanroom main-duct monitoringReturn-air volume trackingExhaust airflow control
Parameter teknis
Typical construction for a cleanroom duct averaging airflow sensor is listed below.
| Bahan inti | 6063 anodized aluminum sensing tubes with galvanized steel or stainless mounting frame |
|---|---|
| Ketebalan Panel (Panel Thickness) | 25-60 mm sensing-tube depth |
| Efektif lebar | 200-1500 mm duct span |
| Panjang maksimum | Up to 1800 mm sensing-grid length |
| Baja menghadap ketebalan | 1.2-1.6 mm galvanized or stainless mounting frame |
| Kepadatan inti (core density) | 2650-2750 kg/m³ for aluminum sensing elements |
| Konduktivitas Termal (Thermal Conductivity) | 150-220 W/(m·K) for aluminum sensing tubes |
| Permukaan selesai | Natural anodized aluminum tubes with clean zinc-coated or satin stainless frame |
| Jenis Bersama | Duct flange or insertion brackets with separated total-static pressure connectors |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Cross-grid or single-span probeAluminum or stainless constructionCircular or rectangular duct fitBarbed or compression fittings
Planning a Airflow Sensor specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
