STjh 35 kW precision temperature and humidity control unit with a narrow single-fan cabinet on white.

STJH-PRECISION-TEMPERATURE-HUMIDITY-UNIT-35KW

Precision Temperature and Humidity Control Unit 35 kW

A compact precision-control unit providing 34.6 kW total cooling and 7500 m3/h airflow from a 950 mm-wide single-fan cabinet.

34.6 kW total cooling
7500 m3/h airflow
950 mm single-fan cabinet

Demander un devis. Browse les produits

Introduction de produit

This small precision unit uses two chilled-water circuits and a single-fan 950 mm-wide enclosure to deliver 34.6 kW of total cooling. The 7500 m3/h air volume supports stable temperature and humidity in electronics, metrology or test zones with a concentrated sensible load.

Key Features

Compact precision footprint

The 950 mm cabinet width fits small critical rooms while maintaining a dedicated high-air-volume cooling path.

Dual water circuits

Two chilled-water circuits allow hydraulic separation or staged coil operation within the compact unit.

Close environmental control

Fan and water-valve modulation can respond to the tighter temperature and humidity demands of test or metrology work.

Paramètres techniques

Total Cooling Capacity	34.6 kW
Nominal Airflow	7500 m3/h
Cabinet Width	950 mm
Cooling Circuits	Two chilled-water circuits
Fan Quantity	1
Fan Control	Variable-speed option
Humidity Functions	Dehumidification with optional humidification
Filtration	Return-air filter section
Air Discharge	Upflow or downflow configuration as selected
Customisation	Water conditions, airflow direction and humidity accessories can be configured for the intended application and operating environment.

Applications

Small electronics clean zones, metrology rooms, precision laboratories and test spaces requiring stable environmental conditions.

Solutions for Your Application

A compact critical room has high sensible load but little wall space for equipment.Use the 950 mm single-fan cabinet and schedule its 34.6 kW capacity against the verified load.

A single water circuit could interrupt cooling during hydraulic maintenance.Use the two-circuit coil arrangement within the project's water-side operating strategy.

Options disponibles

Upflow or downflow air, humidifier, electric reheat, filter upgrades, leak detection, dual-power controls and monitoring interfaces are available.

Planning a Precision Temperature and Humidity Control Unit 35 kW specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe