STjh 2400 CFM high-capacity dust-removal booth with dense air-knife slots, twin intake towers and four filter panels

STJH-PERSONNEL-DUST-REMOVAL-CABINET-AIRKNIFE-2400

Personnel Dust-Removal Cabinet 2400 CFM High-Capacity Air-Knife

A maximum-duty 2400 CFM walk-through air-knife cabinet for severe dust loading and busy worker exits.

2400 CFM maximum-duty airflow
108 x 51 x 104 in cabinet
15 hp air-knife system

Introduction de produit

The higher-capacity air-knife model raises published airflow to 2400 CFM within a 108 x 51 x 104 in enclosure. Its 15 hp system, downdraft grate and self-contained filtration target severe dust loads or higher personnel demand. Compared with the 1500 CFM cabinet, it requires three more inches of depth and greater airflow handling rather than a larger motor rating.

Key Features

Higher capture volume

The 2400 CFM duty supports more demanding contamination loads than the medium model.

Heavy-use filter selection

Self-cleaning cartridges can back-flush collected dust into pull-out drawers for sustained industrial service.

Controlled two-door transition

Dirty-side entry and clean-side exit organize personnel flow through one enclosed cleaning step.

Paramètres techniques

System Airflow	2400 CFM
Cabinet Dimensions	108 W x 51 D x 104 H in
Drive Rating	15 hp
Blow-Off Device	Air knives with 10,000 FPM source-family slot velocity
Worker Flow	Opposed-door walk-through
Capture Surface	Galvanized grated downdraft floor
Heavy-Dust Filter	Automatic-cleaning industrial cartridge system
Alternate Filter Train	Multi-stage disposable media with optional HEPA final filter
Control Option	VFD ramping and door proximity sensing
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Applications

For lead, beryllium, coating, mineral, composite and other demanding industrial de-dusting routes with higher loading or several workers. Confirm dust chemistry, disposal controls, air balance and room pressure before selecting maximum airflow.

Solutions for Your Application

The 1500 CFM model cannot capture the expected heavy dust release quickly enough.Use the 2400 CFM air-knife configuration with filtration selected for the measured loading.

Filters could load rapidly during continuous multi-shift use.Choose the self-cleaning cartridge arrangement and provide safe access to the pull-out dust drawers.

Options disponibles

Specify filter technology, HEPA after-filter, VFD, doors, sensors, lighting and installation in series or parallel. Combustible or toxic dust requires a site-specific engineering assessment.

Planning a Personnel Dust-Removal Cabinet 2400 CFM High-Capacity Air-Knife specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe