STjh 650 mm standard HEPA terminal housing showing the top duct spigot, hanging tabs and shallow square casing

STJH-HEPA-TERMINAL-HOUSING-STANDARD-650

HEPA Terminal Housing 650 mm Standard Top-Entry

A larger welded top-entry terminal for higher-airflow cleanroom, hospital and research supply points.

0.16-0.33 m³/s airflow
2 mm fully welded steel casing
659 mm diffuser face

Introduction de produit

This standard-size terminal uses a 650 x 650 x 370 mm casing and the highest accepted flow range, 0.16-0.33 m³/s. A 659 mm diffuser finishes the room side. The housing is built from 2 mm fully welded mild steel with a RAL 9010 finish, providing a more substantial casing than the mini and T-grid variants.

Key Features

Highest family flow

The accepted range reaches 0.33 m³/s for larger supply duties.

Rigid welded enclosure

Two-millimetre fully welded mild steel forms a robust sealed casing.

Cleanroom white finish

RAL 9010 provides a conventional visible ceiling finish.

Paramètres techniques

Casing Dimensions	650 x 650 x 370 mm
Diffuser Dimensions	659 x 659 mm
Airflow Range	0.16-0.33 m³/s
Clean Pressure Drop	125-250 Pa
Casing Construction	2 mm fully welded mild steel
surface finie	RAL 9010 white
Filter Type	Standard HEPA terminal filter
Air Entry	Top-entry duct connection
Installation	High-airflow cleanroom ceiling terminal
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Applications

Suitable for higher-airflow hospital, research and cleanroom supply terminals. Ceiling support and duct pressure should reflect the heavier welded housing and upper flow duty.

Solutions for Your Application

The intermediate T-grid terminal cannot deliver enough air to the zone.Use the 650 mm casing for the published range up to 0.33 m³/s.

Thin folded casing may be unsuitable for a robust installation.Select the 2 mm fully welded construction and support it independently from light ceiling panels.

Options disponibles

Specify HEPA grade, inlet size, diffuser, test port and ceiling seal. Alternative finish details can be matched to the room design.

Planning a HEPA Terminal Housing 650 mm Standard Top-Entry specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe