Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Équipement d'écoulement et de confinement laminaires
Banque de nettoyage à flux laminaire Single-Operatorpar
Un banc de travail à air propre compact pour un opérateur, dimensionné autour d'une position de travail centrée pour les opérations courantes de préparation, d'inspection et d'assemblage de produits non dangereux.
- Centered One-Person Zone
- Compact Laboratory Footprint
- Low-Glare Task Lighting
- Service Front Access
Introduction de produit
This model narrows the filtered work zone to the natural reach envelope of one seated or standing operator. The centered sash opening, lighting and control panel reduce unnecessary cabinet width while retaining a full stainless work surface. The fan-filter section is accessible from the front or top so the unit can be installed against a wall. Its clean-air zone is intended for non-hazardous product protection in laboratories and small production rooms.
Key Features
A compact base fits between standard laboratory casework modules.
The controller and pressure display remain within easy reach without entering the clean zone.
A one-piece stainless work tray reduces seams beneath small components.
Front-access service panels permit filter and electrical checks where rear clearance is limited.
Des solutions pour votre application
Small laboratories need a protected work zone without paying for unused width or losing access to routine service points.
A wide two-person bench wastes valuable laboratory wall space.The cabinet width is matched to a single centered operator position.
Controls mounted inside the work zone interrupt clean handling.External front controls keep operating adjustments outside the protected surface.
Small parts disappear into segmented worktop joints.A one-piece lift-out tray provides a continuous handling surface.
Rear service access is impossible against fixed casework.The fan, filter gauge and electrical components can be reached from the front or top.
Les applications typiques
Small-batch device assemblyMicroscope sample setupNon-hazardous media preparationClean component inspection
Paramètres techniques
Typical configurable construction ranges for a one-person laminar flow clean bench are listed below.
| Matériaux de base | SUS304 one-piece work tray with powder-coated steel cabinet and acoustic mineral-fibre lining |
|---|---|
| Panneau épaisseur | Sections d'armoire de double-mur de 25-40mm |
| Largeur effective | 700-1000 mm clear working width |
| Longueur maximale | Up to 2100 mm overall freestanding height |
| Acier face épaisseur | 0.8-1.0 mm outer steel; 1.0-1.2 mm SUS304 inner liner |
| Densité Core | 60-100 kg/m³ acoustic mineral-fibre lining |
| Conductivité thermique | 0.036-0.046 W/(m·K) for the acoustic lining |
| surface finie | White epoxy-polyester cabinet finish with brushed stainless work tray |
| Type joint | Sealed folded cabinet joints with a lift-out work tray and clamped filter gasket |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Sitting or standing base heightManual front sashIntegrated power socketsLeft or right service utility panel
Planning a Single-Operator Laminar Flow Clean Bench specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
