Anglais
Le portugais
espagnol
Le malais
Indonésien
Allemand
Le turc
Le vietnamien
FrançaisCurrent
russe
Arabe
Thaïlandais
Japonais
Coréen
Equipement de décontamination du personnel et du matériel
Douche à air basse température à froidpar
A thermally insulated personnel air shower with cold-rated door seals, moisture-resistant interior surfaces and drainable returns for chilled controlled areas.
- Thermally Insulated Shell
- Cold-Temperature Seals
- Drainable Return Path
- Condensation-Aware Design
Introduction de produit
The cold-room air shower combines garment cleaning with a shell designed to control heat gain and condensation at a chilled entrance. Closed-cell insulated panels and thermally separated door frames limit cold bridging, while stainless interior surfaces and sloped return areas accommodate moisture from temperature transitions. The filtered air circuit can be configured for demand operation to limit unnecessary fan runtime between entries.
Key Features
Thermal-break door framing helps reduce cold bridging at frequently used openings.
Low-temperature gaskets retain flexibility through repeated chilled cycles.
Sloped stainless return areas guide condensate away from removable prefilters.
Demand-based operation can reduce heat input from fan running time.
Des solutions pour votre application
Temperature transitions introduce condensation, heat leakage and stiff door seals that are not addressed by a standard dry-room air shower.
Warm humid air condenses on cold internal metal.Closed-cell insulation and thermal breaks help stabilise exposed surface temperatures.
Ordinary gaskets harden during low-temperature cycling.Flexible low-temperature elastomer seals maintain compression around the door frame.
Condensate reaches the prefilter area.Sloped stainless return trays direct moisture away from the filter cassette.
Continuous blower running adds heat to the chilled room.Demand-based controls limit shower fan operation between personnel cycles.
Les applications typiques
Chilled food processingCold-chain pharmaceutical storageRefrigerated packaging roomsDairy hygiene entrances
Paramètres techniques
Typical insulated construction ranges for a low-temperature personnel air shower are listed below.
| Matériaux de base | PIR-insulated stainless enclosure with low-temperature seals, drainable prefilter returns and H13 HEPA recirculation |
|---|---|
| Panneau épaisseur | 75-100 mm closed-cell insulated panels |
| Largeur effective | 900-1500 mm clear cold-room passage width |
| Longueur maximale | Up to 2500 mm insulated chamber length |
| Acier face épaisseur | 1.0-1.2 mm stainless internal facing with insulated external skin |
| Densité Core | Isolation PIR rigide 40-45 kg/m³ |
| Conductivité thermique | 0.021-0.026 W/(m·K) for the closed-cell PIR core |
| surface finie | Brushed stainless interior with light-colour insulated exterior panels |
| Type joint | Cam-lock thermal-break panel joints with low-temperature gaskets and sealed door-frame interfaces |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
75 mm or 100 mm PIR shellHeated door-frame perimeterStainless sloped drain panCold-rated motor and control enclosure
Planning a Low-Temperature Cold-Room Air Shower specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
